Why will my label maker not print?
This issue can occur for a few reasons. The printer may be loaded with an unsupported label size or type, the printer’s sensor may be dirty, or there may be a problem with the DYMO drivers. Make sure you are using a supported label size.
Why is my Brother P-Touch label maker not printing?
Please try the following: Remove the tape cassette and reinstall it, pressing it firmly until it clicks into place. If the print head is dirty, clean it with a cotton swab or optional print head cleaning cassette (TZe-CL4).
How do I reset my brother p-touch?
FAQs & Troubleshooting
- Turn off the P-touch.
- Hold down the “Shift” and the “R” keys.
- While holding down the “Shift” and the “R” keys, press the “On/Off” key or Power key once and then release the “Shift” and the “R” keys.
- “English” should be on the display. The machine has been initialised.
How do you fix a jammed Brother label maker?
a. If the cutter lever jams, try removing the Cutter unit and reinstalling it back into the machine. The Cutter should go straight down into the machine, do not twist the cutter when pushing it into the machine. Reinstall the cassette tape, close the back cover, and check the movement of the lever again.
Why is my label maker printing black?
The ink ribbon (black tape) got caught in between the tape layers and came out of the printer, and the tape cannot be used. This can happen when you install the tape cassette with the ink ribbon (black tape) loose, or pull out the printed tape by hand. If the ink ribbon is broken, you cannot reel it.
Can you reset a Brother P-Touch label maker?
You can reset the internal memory of your P-touch when you want to clear all saved label files, or in the event the P-touch labeler is not operating correctly. Turn off the P-touch. While holding down the Shift and R keys, press the Power key to turn the P-touch back on. Release the Shift and R keys.
How do you clear a Brother label maker?
Reset the label machine
- Turn off the label machine.
- Hold down the Code key and the Clear (BS) key.
- While holding down the keys, press the On/Off key once to turn on the label machine.
- Release the keys.
How do I turn on my Brother P-Touch label maker?
Setting up the P-touch labeler
- Setting the tape cassette. Open the cassette cover. Insert the tape cassette. Close the cassette cover.
- Connecting the power supply. Power the P-touch labeler using the AC adapter or batteries. Using the AC adapter. Plug in the P-touch labeler using the AC adapter.
What kind of Label Maker is the pt-d200?
The PT-D200 makes it easy to create stylish labels for your home and office. With its convenient one-touch keys and an array of pre-designed labels, getting organized just got easier.
What can you do with a brother ptd210?
From labeling file folders and cables and wires to making gift tags and scrapbook pages, there are more uses than ever for the PT-D210. Choose from an assortment of Brother genuine TZe label tape colors in four different widths.
Why is the label not printed on Brother label maker?
The label is not printed after pressing the Print key. Check that the text has been entered and that the tape cassette has been properly installed with sufficient tape remaining. If the tape is bent, cut off the bent section and thread the tape through the tape exit slot.
What to do if brother label maker tape gets jammed?
Remove the label tape cassette and use a dry cotton swab to gently wipe the print head clean in an up-and-down motion. The tape doesn’t feed properly or the tape gets jammed in the label maker. Check that the end of the tape feeds under the tape guides. The cutter lever is used while printing.
