Why is my Primo water dispenser not cold?

My top loading water dispenser is not producing cold water. Unplug the dispenser, open the drain plug on the back and remove water from the hot reservoir. Empty the cold reservoir by dispensing water from the cold tap at the front of the dispenser. Leave the dispenser unplugged and dry until you are ready to begin use.

Where is the thermostat on a primo water cooler?

The cold water thermostat control is mounted onto the back of your Primo water dispenser. First, unplug your water dispenser from the electrical outlet. Then, make sure the appliance is away from any wall that it might be positioned next to. This is so you will be able to access the backside of the dispenser.

How can I improve my water cooling dispenser?

Keep the cold power button on at all times. This will ensure an unremitting supply of colder water. Turning the button off every now and then increases the burden of the cooling compressor to lower the temperature of the water in the reservoir; this lowers the machine’s efficiency.

How long does it take for a primo water cooler to get cold?

It takes up to one hour after setup to dispense cold water. Make sure the power cord is properly connected to a working outlet. dispenser. Make sure green power switch on back of dispenser is ON.

Why is my water machine not cold?

Water cooler troubleshooting Very often if your water cooler is not working, the problem can be traced to the power supply. So as a first step, check that it is properly plugged in at the wall and the mains power is turned on. If it is switched on but not dispensing water, the next step is to check your water supply.

Why is my water cooler not cold?

Very often if your water cooler is not working, the problem can be traced to the power supply. So as a first step, check that it is properly plugged in at the wall and the mains power is turned on. If it is switched on but not dispensing water, the next step is to check your water supply.

How do you remove water from a Primo Water Dispenser?

Any time you intend to leave your dispenser for more than a week, the reservoir should have all water removed. Unplug the dispenser, open the drain plug on the back and remove water from the hot reservoir. Empty the cold reservoir by dispensing water from the cold tap at the front of the dispenser.

Can a Primo Water Cooler provide hot or cold water?

They can provide hot or cold water, depending on the model. Adjusting the temperature of the cold water from a Primo dispenser is easy, and doesn’t require any tools. Primo water coolers give you clear, cold drinking water.

How do you change the temperature of Primo Water?

Adjusting the temperature of the cold water from a Primo dispenser is easy, and doesn’t require any tools. Move the Primo water dispenser away from the wall, being careful not to tip or spill the water bottle. Locate the flat, brass-colored screw on the back of the water dispenser.

Is the size of the probe on Primo Water Dispenser adjustable?

Yes, all probes are adjustable. At the top of the probe, there are tabs that when pressed together simultaneously will release the bottom portion to adjust to a 3 gallon bottle. Where can I find my dispenser’s manual?