Why is my magic eye not working on Sky?
Re: Magic eye suddenly not working The most likely cause is poorly fitted plugs at one or both ends of the coax cable which runs from your Sky box to the TV upstairs. You can check that the magic eye isn’t faulty by plugging it directly into the rf2 socket to see if it then ! ights.
How do I get my magic eye to work on my Sky HD box?
- Turn off the power to your Sky box.
- Plug iO Link into iO port on the back of your box.
- Connect the iO Link to the TV Link using the coaxial cable.
- Turn the power back on. ( Wait 3-4 mins before trying to take your Sky box out of standby)
How does a TV magic eye work?
This “Magic Eye” remote extender lets you control the TV channels on your digital satellite box from another room in your house. The device connects between the coaxial cable and the aerial socket on the back of the TV.
How do I reset my DStv eye?
Reset DStv remote
- Hold down both the ARC and Standby for about 3 seconds. During this step, the remote lights should change to amber.
- Continue holding the ARC button as you release the Standby.
- While you are still pressing the ARC button, dial 9499.
- Now, release the ARC button to complete the reset process.
Why do I see Magic Eye inverted?
I’m seeing the image concave instead of convex. MOST MAGIC EYE IMAGES are built to be viewed by allowing your eyes to diverge, as if you’re focused on an object more distant than the printed page. If you cross your eyes you’ll also see in 3D, but you will invert the image (see the image inside out).
Is the red light on the TV link magic eye?
Connect the TV link ‘magic eye’ directly to the back of the digibox on RF2 with no coax in the way. Does the red LED come on? If yes then the connectors on the cable probably aren’t on OK. I had this problem when I did mine!
Why is my magic eye not working on my TV?
As one of the TVs still has a good picture and one magic eye still controls your Sky box (I’m assuming that’s the case from your post) your Sky box is ok. The most likely problem, therefore is with your cabling.
Is the Kitchen Magic Eye the Sky Box?
No, both magic eyes lost the ability to control the sky box, apologies for not making that clear. Just seemed very coincidental that this happened after the upgrade. The kitchen one is a proper magic eye, the bedroom one is an eBay special, can’t see why they both worked well before and all…
Why is there no red light on my TV link?
Try to isolate where the ‘fault’ lies. Connect the TV link ‘magic eye’ directly to the back of the digibox on RF2 with no coax in the way. Does the red LED come on? If yes then the connectors on the cable probably aren’t on OK.
