Why is my ice maker not working but water does?

If the water inlet valve is defective, or if it has insufficient pressure, it won’t allow water to flow through. As a result, the ice maker won’t make ice. The valve requires at least 20 psi to function properly. Make sure that the water pressure to the valve is at least 20 psi.

How do you reset a Sub Zero freezer?

To reset a Sub-Zero product:

  1. Turn the unit off at the control panel. For units with a dial control, turn the knob to zero (0) or off.
  2. Turn the home circuit breaker to the unit off for 30 seconds and back on again. Retest the unit operation.

How do you unfreeze a Sub Zero ice maker?

Do one of the following depending on model and accessibility:

  1. Manually defrost the freezer for 4-6 hours by turning it off.
  2. Disable the freezer.
  3. Turn power to the unit off and use a steamer to aim steam at the ice maker assembly for 5-10 minutes.
  4. Fill tube is located on the back or side wall above the ice maker.

How do I fix my Sub Zero ice maker?

Sub-Zero Ice Maker Troubleshooting: Not Making Ice

  1. Check the water filter.
  2. Check that the ice bucket is correctly placed.
  3. Check that the ice level arm is in the down position.
  4. Check whether the fill tube is frozen.
  5. Check that ice isn’t obstructing the exit from ice maker.
  6. Check the water supply lines.

What temp should a Sub-Zero freezer be set at?

0 degrees
The best temperature for your Sub-Zero refrigerator is 38 degrees Fahrenheit and the freezer should be set to 0 degrees. However, fluctuations between -/+ 5 degrees are normal.

Why is my Sub-Zero ice maker freezing up?

A lack of ice can also be due to a Sub-Zero ice maker freezing up from ice jams. As an ice maker produces ice, there may be small amounts of water or slush that are not completely frozen as the ice is harvested. This slush can freeze on the ice maker and block new ice from falling into the ice bucket.

How long does it take for a Sub-Zero to make ice?

Answer: All Sub-Zero in-unit ice makers produce eight cubes of ice every 2-3 hours on average. The ice bucket may take 1-2 days to fill completely. Ice production for Built-In and Designer (Formerly Integrated) models may be temporarily increased by initiating the Max Ice feature.