Where is the starter on a Harley?

Check the visual condition of the starter and the starter solenoid, located on the right side of the engine behind the rear cylinder. Specifically look for loose wiring connections or damaged wiring.

How do I know if my Harley starter is bad?

Symptoms of a bad motorcycle starter may include the motorcycle not being able to start at all, the motorcycle only starting intermittently, hearing the starter running even when the engine has already started, and being able to hear a strange clicking sound from the starter.

How do I test a starter on a Harley Davidson?

PUSH TEST: Run a second ground lead from the battery negative terminal to the solenoid post. Then, run a lead from the starter contact (where the green trigger wire from your start button plugs into) and connect the opposite end to the battery positive post. *The starter shaft should PUSH out.

Can you start a motorcycle without a starter?

Understand the limitations of the pop-start Push-starting a motorcycle just eliminates the need to use the starting system. Be sure, then, that your battery or starter is at fault. If the battery has enough juice to shine the headlight fairly brightly, you can probably pop-start your bike.

How do you start a motorcycle that won’t start?

What to Do When Your Motorcycle Won’t Start (But the Battery is Good)

1. Confirm There’s Gas in the Tank.
2. Engage the Clutch.
3. Put the Motorcycle in (the Right) Gear.
4. Look for Loose Wires.
5. Confirm the Kill Switch is Off.
6. Ensure the Fuel Valve is Set to “On”
7. See if the Fuel Injection System is Functional.

How much does a Harley Davidson starter cost?

Compare with similar items