Where do I put my kicker motor bracket?

Horizontal Measure Choose the most appropriate side of the transom. Since the outboard tiller is usually on the port side of the motor, most kickers are mounted on the starboard-side of the transom to facilitate easier tiller steering and throttle control while slow-trolling or putting home.

How do you lock a kicker motor in up position?

Tilt the motor all of the way up to its traveling position. Lay the motor over on the side that gives the least pressure to the fuel line. With the motor laid full over on its side with the motor tilted all of the way up, it will stay there.

Is a kicker motor necessary?

A kicker is not necessary. A big motor as well as an electric trolling motor is not necessary as well. Millions of boats in use every day that have no motors of any kind of them.

How does transom saver work?

The transom saver is a device that protects your boat’s transom from stress or eventual damage from forces exerted on it by the weight of the outboard while you are trailering it. The transom saver connects to the trailer’s rear cross, absorbing stress for the engine bracket and transom.

Why won’t my trim work on my boat?

If the tilt and trim motor works fine but the engine won’t raise or lower, slips down when in the raised position or won’t stay trimmed, chances are that the problem is with the hydraulic pump or valve body assembly. If the level is adequate, the problem is most likely with the hydraulic pump.

Which is the best kicker bracket for a boat?

The Norestar kicker motor bracket can lock and hold outboard motors to the boat securely. For effective propulsion the bracket is able to lower the motor down beneath the water level. As with all the brackets we have selected, it can accommodate different boat sizes and motors.

Why do you need a kicker motor bracket?

A kicker motor bracket plays a significant role in securing your motor to the boat. There are different brands on the market, but you need to choose the best. When buying the motor brackets, you need to pay careful attention to the specifications.

What’s the maximum weight for a kicker motor?

The twist-lock knobs secure the bracket in place for the safe operation of your kicker motor. But let’s dive into some of the important specs. The maximum weight capacity for the bracket is 169lbs. It is also recommended that the motor does not exceed 30HP.

What kind of brackets do I need for an outboard motor?

Auxiliary outboard brackets and Powerlift brackets are made to accommodate a trolling or kicker motor. Our Powerlift bracket uses an electric over hydraulic actuator to lift and lower your auxiliary motor with the flip of a switch. The Powerlift has 24 inches of vertical travel for maximum performance while you outboard is in or out of the water.