What year was the John Deere L120 made?
John Deere L120 Engine The 20 horsepower CV40 was used in 2003 and 2004, to serial number 150001. The 22 horsepower engine was used in 2005, the final production year.
How many horsepower is a John Deere L120?
20 horsepower
Engine Specifications Two different Briggs & Stratton engines were used in the L120 mower, but both deliver 20 horsepower. The Briggs & Stratton CV40 Intek engine used in 2003 and 2004 models has two cylinders, as does the B&S 40 656cc Intek engine used in 2005, the last year the L120 was manufactured.
How do you engage the blade on a John Deere L120?
How to Engage Lawn Mower Blades on a John Deere
- Turn the key to the “on” position, advance the throttle to half speed and allow the engine to warm up for 2 minutes.
- Lower the mower to the desired cutting height.
- Engage the mower blades; push the lever to the right of the steering wheel all the way forward.
How big is a John Deere L120?
John Deere L120 Dimensions
| Dimensions | |
|---|---|
| Length: | 60 inches 152 cm |
| 69 inches 175 cm (2005) | |
| Width: | 36 inches 91 cm |
| Height: | 38.6 inches 98 cm |
How much does a John Deere L120 weigh?
532 lbs
John Deere L120
| Dimensions & Tires | |
|---|---|
| Weight: | 532 lbs 241 kg |
| Front tire: | 16×6.5-8 |
| Rear tire: | 22×9.5-12 |
| Full dimensions and tires … |
What size are the front tires on a John Deere L120?
John Deere L120 Dimensions
| John Deere L120 Tires | |
|---|---|
| Lawn/turf front: | 16×6.5-8 |
| Lawn/turf rear: | 22×9.5-12 |
Are John Deere blades reverse threaded?
They are regular thread… but tight. Best to use an impact wrench to remove them… Here is the Owners Manual in pdf, for that model..
Why wont my blades engage on my John Deere mower?
It could be your bearings and your spindle pockets, or spindles, have seized up,” says Oshel. If the blades are stuck, pump some grease into the fitting and carefully work the blades back and forth by hand until they move freely.
