What tuner will delete DPF Duramax?

Diesel Particulate Filter (DPF) – The EFI Live AutoCal is a DPF delete capable tuner.

Will a tuner delete DPF?

The tuner deals with the software, where it configures and equips the engine to work without a DPF. Meanwhile, the exhaust physically replaces the DPF. Moreover, expert mechanics or people with experience also code the system and make sure the sensors in your engine are not disturbed after the removal with the tuner.

Do you need a programmer for DPF Delete?

If you leave the DPF on and try to stop the regens, the dpf will clog up and kill your motor. If you want to stop the regens you will HAVE TO DELETE THE DPF or risk screwing up your engine. You will also need a tuner/programmer to do this without harming your engine.

Can you delete DPF and not EGR Duramax?

I have an 09 lmm that is dpf deleted. You will need a tuner to do it but yes you can. I had my egr shut off and I bought a blocker plate but never installed it.

What is DPF on LMM Duramax?

Quality OEM DPF Replacement products for your GMC/Chevrolet . DPF’s offer the following features. Equivalent Performance to the OEM Diesel Particulate Filter. Filters 99% of Engine-out Soot/PM (Particulate Matter) Lower Back Pressure Levels Compared to Competitors at All Tested Engine Loads.

Has anyone been fined for DPF Delete?

Okay, so the $22,000 question: is it legal, and can you get fined for deleting the DPF? The short answer is, yes you can get fined, and no, it’s not legal.

Can I delete my truck without a tuner?

Myth #1 – Deleting or Tuning a Truck is Legal There is no way around this; it is 100% illegal to tamper with or modify the emission system on your truck in any way. It isn’t a state or local law (although those exist, as well), but Federal law.

What tuners will delete DPF?

DPF Delete Tuners

  • H&S Performance Mini Maxx | DPF Delete Tuner.
  • RaceME Ultra | DPF Delete Tuner | Dodge Ram Cummins Diesel 6.7 07-21.
  • SCT X4 / Bully Dog BDX | DPF Delete Tuner | Ford Powerstroke Diesel 6.7 11-19.
  • EFI Live AutoCal V3 | DPF Delete Tuner | GM Duramax Diesel LMM / LML 07-16.

How many miles will a 2008 6.6 Duramax last?

GM has given the engine a 95% rating at 200,000 miles. This means that GM predicts that 95% of all engines will not reach 200,000 service hours based on durability and wear. If you want to know how long a Duramax engine will run, you should expect it to last as much as 300,000 miles before needing any major repairs.

What is the fine for DPF Delete?

Here is the specific fine from the EPA if you are caught with DPF delete: Violators are subject to civil penalties up to $45,268 per non-compliant vehicle or engine, $4,527 per tampering event or sale of the defeat device, and $45,268 per day for reporting and recordkeeping violations.

Does DPF Delete increase horsepower?

Just removing a (properly working) DPF will not give you any engine performance improvement. At best removing a blocked DPF (or drilling holes) may restore some of the original engine performance.

Is the Duramax EGR DPF Def delete tune?

2001 – 2016 GM 6.6L Duramax | EFI Live A Flash First File update 0 HP HTOW +30HP ECO +80HP Street +120HP Race +150HP

What’s the best tune for a Duramax DPF?

It plugs into the EGT #1 Sensor. This Switch will NOT work with any other tuning based on the switch being modified to our specifications. Power level notes: 30HP will be used for heavy towing (up to the trucks capacity). 60HP – 80HP is best for MPG and can be used for light towing for anything under 10k LBS.

Can a DPF sensor be removed from a Duramax?

All other sensors, throttle valve, EGR temp sensors, and EGR valve control can remain plugged in to prevent corrosion. DPF/SCR and all associated sensors can be removed from exhaust and tied up along frame rail for future use if required.

How do you change tune on GM Duramax?

They do NOT require you to stop the truck and wait 5 minutes for the truck to re flash, you just turn the rotary dial to the position of the tune you want while the truck is running or driving down the road and carry on. These switches are modified and do NOT require being pinned to the ECM like a traditional LML switch does.