What size is a toilet shut off valve?
4 days ago
The most common size among them is 3/8”,1/4” and 1/2”. It’s better to get a ⅜” shut-off valve when you’re thinking of buying a new one. Because it’s easier to get the necessary tools for ⅜” sizing. It also ensures adequate water flow to the system.
What is the standard toilet water supply line size?
Toilet water supply line come in three styles. Most of the time, you have a 3/8″ fitting at the shut off valve and a 7/8″ fitting at the toilet tank.
Can a toilet supply line be too long?
You virtually never have a toilet and shut off valve exactly the distance apart that a line will fit exactly. Don’t overdo it, just go to the closest length and you’ll be fine.
What is a supply line for toilet?
Toilet water supply lines carry water from a nearby cold-water supply line to your toilet tank to enable it to flush. Step 1: Measure the distance between your water supply valve (on the wall or floor beneath the toilet) and the point where the line connects to the toilet tank.
Which toilet supply line is best?
In my personal and professional opinion after more than 21 years in the plumbing profession, the metal nut is the better toilet supply line to choose. Out of the thousands of supply lines, we replace every year about 1% of them are toilet supply lines with metal connectors.
Can I shorten water supply line?
Plastic lines are customized to the size necessary for the job. A pair of tin-snips will cut the line to the proper size. The connections use compression fittings. Tighten the nut down onto the faucet or water pipe, which compresses the plastic washer, sealing out leaks.
Can you loop supply lines?
Although these copper supply tubes are somewhat flexible, they can’t be looped or twisted around if they’re too long for your supply setup. You need to cut them to length to fit into the open end of the shut-off valve. You can take the excess length and simply put a loop in it and then connect it to the shut-off valve.
Are braided supply lines better?
Braided stainless steel is usually the most expensive option for flexible supply tubes, but is also the most attractive and most durable.
Can a water supply line be too long?
Ignore the Length The hot water may be delayed for one or two seconds, but the water pressure will be unaffected. The only downside to a longer-than-necessary flex line is that the line will bunch up beneath the sink, taking up some valuable room.
Is it OK to bend toilet supply line?
A slight bend in a flex hose is OK. I’ve had to do it many times. The thing to watch out for is twisting of the flex hose while tightening.
What is the best toilet supply line?
The water supply line for a toilet typically stubs out of the wall just under the toilet tank on the side where the water inlet on the tank is located. One-half-inch copper pipe is the most common material for the line, and it can tie into any existing 1/2- or 3/4-inch cold water line — the nearest one is usually the best.
What is the standard size of a toilet pipe?
If your home has one or two toilets, the standard toilet sewer pipe size is 3 inches. The sewer pipe connects to the toilet flange beneath the toilet, and this flange is a standard 3 inches. You cannot reduce the size of the pipe anywhere along the piping.
What size supply line for bathroom faucet?
Bathtub faucets should have a 3/4-inch supply line, as opposed to 1/2-inch for the rest of the house. Some tubs hold up to 60 gallons of water, so you’ll want a faucet that can get the job done in a timely manner.
What is the best pipe for water lines?
Instead, plumbers today usually use copper, PVC, or polyethylene pipe for water supply lines. Copper is generally considered the best material for water supply lines.
