What oil does a BMW MINI take?
MINI Cooper Oil Recommendations MINI High Performance Synthetic 5W-30 Oil is the most highly recommended option, as it is used by MINI themselves during a MINI Oil Change and is even listed with other MINI Cooper parts (part number 07 51 0 143 829).
What is the best engine oil for a classic MINI?
Classic Mini Oil 20w50 is a moderate detergent premium SAE 20w50 multigrade mineral engine and gear oil. It has been specifically engineered for classic mini engines with integral gearbox for excellent engine performance incorporating gear oil additives for smooth gear shift.
Can I use 5w40 instead of 5W30?
In practice, this means that each oil is just as viscous at lower temperatures and will remain viscous at -30°C, however 5w40 oil outperforms 5w30 oils at higher temperatures, being effective up to ambient temperatures of 50°C, as opposed to 30°C.
What oil does a 2004 Mini Cooper take?
Engine Oil
| Viscosity: | 5W-30, 0W-30 (All TEMPS) |
|---|---|
| Capacity: | 5.1 quarts. (with filter)After refill check oil level. |
| Torque: | 18 ft/lbs (Oil Drain Plug) |
Can you use 10W 40 in a Mini Cooper?
Older models not requiring full synthetic oil can use a 10w/40 mineral based oil readily available. Please note that all Mini Cooper S models, Turbo and Supercharged engines, require full synthetic oils.
What is 20W 50 engine oil?
The numbers 20W50 refer to the viscosity of the motor oil, set by the Society of American Engineers. This refers to its fluidity or thickness. The “20W” indicates how quickly the engine will start when cold or in cold weather. The “50” refers to the thickness of the oil when the motor has been running for a while.
How much engine oil does a classic Mini take?
It takes just under 5l and 20/50 oil is best, as it protects your gearbox..
Can I use 0w30 instead of 5w30?
0W-30 is a special type of motor oil. It has a low viscosity and can be used in place of 5W-30 or 10W-30. The 0W-30 is a fully synthetic motor oil type that is capable of enhancing and improving fuel economy due to its lower friction properties.
What does 5W-30 mean?
5w30 motor oil has a winter viscosity grade of five, meaning it’s less viscous (less thick) at very low temperatures compared to, say, 10w30. It has a hot viscosity grade of 30, which means it is less viscous at high temperatures than an oil such as 5w50.
Can I use 10W-40 instead of 5W30?
Your vehicle does not use 5W-30 oil. The recommended oil viscosity for your vehicle, according to Kia documentation, is 10W-40. If you drive the vehicle in exceptionally cold weather, well below 32 degrees, you can use 5W-30 oil but even 10W-40 is still perfectly OK to use if outdoor temperatures are below freezing.
What should the overbore be on a Mini engine?
Camshaft manufacturers can recommend the appropriate cam for your intended uses. Re-boring the engine is the other direction to go in to increase power. Given the expense, it is best to start with a 1275cc block. Standard overbores are 1293cc, 1310cc, and 1328cc, although the block is commonly bored to 1380cc while retaining reliability.
What kind of engine does Morris Mini 850 have?
The initial engine used to power the Mini was the BMC A series 848cc unit, fitted transversely and driving the front wheels through an integrated gearbox. In Australia, the Morris 850 was available in a limited number of colours, namely red, white, blue and yellow.
What kind of engine does a mini have?
All Minis were fitted with an A-series engine in 848cc, 998cc or 1275cc form. It’s an engine that will take some abuse and neglect but even when it’s worn it can be hard to spot. Check for the usual signs of wear, especially blue exhaust smoke indicating that oil is being burned, and ensure the head gasket hasn’t blown.
