What kind of wire do you use for grape trellis?
galvanized wire
Use galvanized wire for the grape trellis. Galvanized wire is durable and does not cause serious wire chafing of young vines. Wire sizes commonly used include numbers 9, 10, or 11. Wires are secured to end posts in various ways.
What is the best gauge wire for grape trellis?
What wire gauge should I use for my trellis system? For wine grapes, 12.5 ga or 11 ga wire sizes are common for load bearing wires (cordon wires). For higher yield vineyards, 11 ga wire may be appropriate. For catch wires, 12.5 ga and 14 gauge wire sizes are very common.
Can grape vines grow on wire?
Wrap the galvanized wire around the screws from one post to the other at both the 3-foot (1 m.) and 5-foot mark (1.5 m.). Train the vines to grow along the top and middle wire between the posts, continuing to tie them every 12 inches (30.5 cm.). Another idea for supporting a grapevine is by using pipes.
Can I use galvanized wire for trellis?
One cheap option to use is galvanized wire because it can withstand the weight of the vines when properly set up, can withstand the test of time, and can be bought at a very low price. In addition, galvanized wire can be made into a wide framework of trellises without spending too much money.
What gauge wire do I need for trellis?
The top wire on the trellis is the load-bearing wire. Use a 121⁄2 gauge high tensile electric fence wire. The lower wires are for cane positioning and do not need to be as heavy. A 14 gauge high tensile wire should be adequate.
How tall does a grape trellis need to be?
Wine grapes may be trellised at a 40-inch (100-cm) height, which is convenient for harvesting and pruning. A slightly greater height (5 ft [1.5 m]) is common in table grape production, but arbors or patio structures 7 feet (2.1 m) high or more may be used.
What size galvanized wire for trellis?
In the beginning we used 12 gauge galvanized wire for trellis support because someone had given us what was left of a roll. After several years of experimentation I’m ready to say 14 gauge wire is easier to work with and seems to be more than strong enough.
