What kind of speakers are in a Marshall 1960A cab?

The 1960A is the angled version that features four G12T-75 speakers and is the perfect addition to your stage or recording rig!

Can you hook up 8 ohm speakers to a 4 ohm amp?

Yes, you can use 8 ohm speakers with a 4 ohm amplifier. Just wire two 8 ohm speakers of the same wattage in parallel.

How many ohms is a Marshall 4×12?

16 ohms
A 4×12 cab is typically 16 ohms, so when you connect two of them together in parallel, the total load becomes 8 ohms.

Can I replace an 8 ohm speaker with a 16 ohm speaker?

You can’t replace a 16 ohm driver with an 8 ohm, the crossover won’t work correctly, which could lead to further damage.

What speakers did Marshall use?

FFXIhealer Well-Known Member

  • 1960 A/B Lead. 4×12″ Celestion G12T 75-watt speakers. 300 watts.
  • 1960 AV/BV Vintage. 4×12″ Celestion G12 Vintage 70-watt speakers. 280 watts.
  • 1960 AHW/BHW. 4×12″ Celestion G12H 30-watt speakers. 120 watts.
  • 1960 AX/BX. 4×12″ Celestion G12M Greenback 25-watt speakers. 100 watts.

What speakers were used in 1960A?

The 1960A is the angled version that features four G12T-75 speakers and is the perfect addition to your stage or recording rig! It’s ideal for players who appreciate clarity and quality. To ensure the ultimate in flexibility, the 1960A is switchable between mono (4 or 16 ohms) and stereo (8 ohms per side).

Will a 8 ohm speaker work in a car?

So using that 8 ohm speaker will give you the same amount of output, at half the power required as a 4 ohm speaker. Your amps run cooler and draw less power from your vehicle’s charging system, your speakers run cooler, and everyone is happy!

Can you run an 8 ohm head into a 4 ohm cab?

And what are the consequences if you do 8 ohm head to 4 ohm cab? Maybe nothing. But you will be overloading the output of a SS amp and creating higher internal heat on the output transistors. So you might burn out a transistor(s).

Is 8 ohms louder than 16 ohms?

A 16 ohm speaker can handle more output, it can go louder. Nope. A 8 ohm amp at 50 watts and a 16 ohm amp at 50 watts will both be about the same volume level, if both are using matched speakers, that’s determined more by the output wattage and efficiency of the speakers.

How does Weber Z Matcher work?

The Z-Matcher allows you to match the output impedance of your amp to impedances of speakers and cabinets that are not the same as your amp output impedance. Matches 2, 2.6, 4, 5.3, 8, and 16 ohms amplifiers to 2, 2.6, 4, 5.3, 8, and 16 ohms speaker systems.