What is the symbol for chamfer?

CH
Engineering drawing abbreviations and symbols

What is a chamfer in engineering drawing?

A chamfer /ˈʃæm. fər/ or /ˈtʃæm. fər/ is a transitional edge between two faces of an object. Sometimes defined as a form of bevel, it is often created at a 45° angle between two adjoining right-angled faces.

How do I specify a chamfer?

You can chamfer a corner by specifying the distance on one side of the chamfer and the chamfer angle.

1. Click Home tab Modify panel Fillet drop-down Chamfer.
2. Click Chamfer Options panel Angle.
3. On the ribbon, in the Chamfer Options panel, check the chamfer length and angle values.

What does STK mean on a drawing?

The designation of STK is understood to mean that the surface being dimensioned is acceptable with its stock finish and does not require machining. Flatness: Machined surfaces shall be flat within the tolerances of the linear dimension of the drawing unless otherwise required by GD tolerance callouts.

What does typ mean in drawings?

(engineering drawings) Abbreviation of typical: used to label a feature that is to be interpreted as exactly the same as nearby comparable features. Four equally spaced bolt holes on a bolt circle can be dimensioned at one hole with the notation (TYP) following it.

What is C1 chamfer?

You can dimension chamfers in drawings. X display is the size of the X in a chamfer dimension with two numbers, such as 1 X 45° (Length X Angle), 45° X 1 (Angle X Length), 1 X 1 (Length X Length) or C1 (chamfers of 45°). Chamfer dimensions can be displayed with various types of text and leaders and sizes of X.

How do you show chamfer in drawing Creo?

Click Sketch > Chamfer. The Select dialog box opens. 2. Select the first chamfer reference, such as a point on a model edge or draft entity.

What is chamfer command?

The chamfer is a command through which you can cut corners of two adjacent sides of any 2d shape at any distance or any particular angle by entering specific values.

Is chamfer the same as bevel?

Unlike a beveled edge that joins one part with another, chamfers transition between two right-angle surfaces of the same part. Chamfers always sit at a 45-degree angle, unlike a bevel. Chamfers remove the sharp edges of a part’s 90-degree corner to prevent injury while handling.

What is a C5 chamfer?

It has to be “C5”. When you put chamfer dimension you are just able to select one edge. If it is possible to select multiple edges and add all edges to shows total number. In this case has to be “C5”.

What does CHK mean?

CHK