What is the difference between 6010 and 6013 welding rod?

The 6013 has a more mild penetration with a larger pool that doesn’t cut through rust like the 6010 or 6011. This electrode is a favorite for structural welders based on its smooth arc. Its mild penetration and bigger pool leave larger, stronger, less defined beads.

What is a 6013 welding rod used for?

DESCRIPTION: 6013 is a high titanic coated electrode. This electrode was primarily designed to provide good wetting and shallow penetration for thin sheet metal applications (using smaller diameter electrodes), but with sufficient penetration for welding medium gauge steel.

Is 6010 or 6011 better?

Both 6010 and 6011 are good electrodes. 6011 runs on AC and direct current electrode positive (DCEP), while 6010 runs only on DCEP. This gives 6011 an advantage if you have an AC-only machine. I have found, and think most welders will agree, that 6010 runs more smoothly.

Is 6011 or 6013 Rod better?

The 6013 electrode is best used for light to medium penetration on a thin metal, or sheet metal. The 6011 electrode offers more penetration than the 6013 so you can weld a slightly thicker material.

Why is 6010 so hard?

Modern stick welders won’t run E6010 electrodes because they do not have the right components to stabilize the aggressive arc these electrodes create. All welders must have big inductors, output enough welding voltage, and inverter welders must include suitable software to handle the whole procedure.

What amp do I need to weld with a 6013 Rod?

THE CORRECT AMPERAGE FOR THE 6013 WELDING ROD?

Is 6013 strong enough?

On the negative side, E 6013 does leave a heavy slag formation and is relatively shallow penetrating if not correctly used. But it does yield an extremely high quality weld which, while not as strong as a E7018, is a strong reason not to discount it.

Can you weld stainless with 6013?

You can use 6013, depending on your welders capacity. It’s much like 6011 which i’ve used on SS before.

Why is 6010 used for root pass?

E6010 is a quick freeze electrode that is partially shielded by CO2 gas developed from the cellulosic coating making it ideal for all position root pass welds. Because of the moisture content in the coating, it generates hydrogen and welds thereof are more prone to hydrogen cracking when coolng rates are high.

Why can some welders not run 6010?

What amp do I need for 6010?

75 to 125 amps
The correct current, or amperage, setting primarily depends on the diameter and type of electrode selected. For example, a 1/8-inch 6010 rod runs well from 75 to 125 amps, while a 5/32-inch 7018 rod welds at currents up to 220 amps. The side of the electrode box usually indicates operating ranges.

What positions can you weld 6013?

The electrode can be used with small AC power sources having low open-circuit voltage as well. The 6013 finds its applications in vehicles, shipbuilding, and repair, sheet metal, the build-up of over-machined and worn mild steel surfaces and general light fabrication.

What is the meaning of 6013 welding rod?

The 6013 rod is a commonly used welding rod in the industry. It is an all-position welding rod , the welds of which can resist 60,000 pounds of stress per square inch. Welding with 7018 has higher endurance, however, the 6013 welding rod is still pretty tough and sufficient for most projects.

What is 6013 means?

The 6013 is a general-purpose welding electrode made of mild steel and can be used in all positions of a welding process. The electrode delivers a smooth and medium penetrating arc.

What is 6010 welding rod?

6010 arc welding rods are used in the pipelines and fills in the pipes. It can be used to weld on direct current only and not on AC. It provides excellent control of arc. This rod gives deep penetration and works well in all positions.

What is E6013 welding rod used for?

Uses and Applications of 6013 Rod. The E6013 is designed for medium to light penetration welding. It is used for welding carbon steel and is also used for welding any type of polarity. As mentioned above, it is very popular for beginners because it readily provides a stable arc that is fit for welding poor fitting joints.