What is JIC thread size?
JIC 37° Flare (SAE J514)
| Inch size | Dash size | Male Thread O.D. (in) |
|---|---|---|
| 5⁄8 | -10 | 7⁄8 |
| 3⁄4 | -12 | 11⁄16 |
| 7⁄8 | -14 | 1 3⁄16 |
| 1 | -16 | 1 5⁄16 |
Is JIC the same as SAE?
JIC fittings are dimensionally identical to AN (Army-Navy) fittings, but are produced to less exacting tolerances and are generally less costly. SAE 45-degree flare fittings are similar in appearance, but are not interchangeable, though dash sizes 2, 3, 4, 5, 8, 10, 14, and 16 share the same thread size.
What size is #8 hydraulic hose?
How to Interpret Hose, Tube & Fittings “Dash Sizes”
| HOSE I.D (Inches) | ||
|---|---|---|
| All EXCEPT Transportation & Refrigerant Hoses | ||
| -6 | 3/8 | 10 |
| -8 | 1/2 | 12,5 |
| -10 | 5/8 | 16 |
Can you mix JIC and an fittings?
JIC Steps In The majority of the hydraulic population agrees, the JIC (or SAE) 37 degree fittings are generally interchangeable with AN fittings.
Is JIC the same as NPT?
JIC fittings is absolute different seal, not interchangeable. JIC hydraulic fittings is used in high pressure system, NPT fittings is used in low-pressure system. NPT pipe threads have always been popular, as leaks can be fixed by simply tightening the fitting.
What size is 10AN hose?
The Good News
| Male Thread Size | AN Size* | Equivalent Tube Size (Nominal OD) |
|---|---|---|
| 9/16-18 | 6AN | 3/8″ |
| 3/4-16 | 8AN | 1/2″ |
| 7/8-14 | 10AN | 5/8″ |
| 1 1/16-12 | 12AN | 3/4″ |
How many threads are in a JIC pipe?
SAE O-Ring Thread 5/16 – 24 3/8 – 24 7/16 – 20 1/2 – 20 9/16 – 18 3/4 – 16 7/8 – 14 11/16 – 12 13/16 – 12 15/16 – 12 15/8 – 12 17/8 – 12 2 ½ – 12 NPTF Pipe Thread 1/8 – 27 1/4 – 18 3/8 – 18 1/2 – 14 3/4 – 14 1 – 11½ 1¼ – 11½ 1½ – 11½ 2 – 11½ 2½ – 8 3-8
How does a zero clearance JIC fitting work?
The flat face of the fitting connects to a tube adapter so you can slide the tubing and fitting sideways to disconnect in cramped spaces. They are also known zero-clearance fittings. Also known as JIC (Joint Industrial Council) fittings, these provide a tight metal-to-metal seal on steel tubing that is flared to 37°.
What is the adapter connector on a JIC fitting?
Adapter Connector Nut Sleeve Plug Cap Reducing Adapter Reducer
What do JIC fittings do on stainless steel tubing?
Also known as JIC (Joint Industrial Council) fittings, these provide a tight metal-to-metal seal on stainless steel tubing that is flared to 37°. The male pipe threads on these fittings have a sealant applied for extra protection against leaks.
