What is end entry ball valve?

End-entry floating ball valve For use in low and medium shock, inline type applications such as sea water, ballast, fuel distribution, oil distribution and grey water. The rigid, lightweight one-piece construction eliminates any potential circumferential leakage.

What are the four types of ball valves?

There are four general body styles of ball valves: single body, split body, top entry, and welded. There are four general types of ball valves: full port, standard port, reduced port, and v port.

What is side entry valve?

Side entry ball valves are valves that assembled its ball from the side part. It usually assembled in two pieces or three pieces body. It just like a globe valve that has body and bonnet except the trim part utilize a ball type. It comprises a one single body.

What are the different types of ball valves?

Types. There are five general body styles of ball valves: single body, three-piece body, split body, top entry, and welded. The difference is based on how the pieces of the valve—especially the casing that contains the ball itself—are manufactured and assembled. The valve operation is the same in each case.

Where are globe valves used?

Globe valves are used primarily in situations where throttling of the commodity is required. By simply rotating the handwheel, the rate at which the commodity flows through the valve can be adjusted to any desired level. Having the valve seat parallel to the line of flow is an important feature of the globe valve.

What is side entry?

1. side entrance – an exterior door at one side of a building. side door. exterior door, outside door – a doorway that allows entrance to or exit from a building.

What is a split body valve?

As an alternative to one-piece ball valve body designs, a new split-body valve series with a two-piece bolted-body design meets ANSI take-out dimensions for either a long full port or short reduced port pattern. Engineers typically discard larger, one-piece body valves when seat failures occur.

Are V-ball valves directional?

Control valves in general and V-Ball valves in particular are not bi-directional and need to have the arrow on the body.

What is a V-ball valve?

V-ball valves feature a quarter turn (90°) ball rotation, allowing them to operate and shut off at much higher working pressures. Because of this, smaller lower torque actuators can be used, which results in cost savings and higher efficiency in the user’s application.