What is an axle assembly?

Axle Assembly – This refers to the axle shafts that are found at the front of a FWD vehicle, and at the rear of an AWD car or SUV. They do not support any vehicle weight – they just transfer power from the engine to the wheel. CV Axles are a type of axle assembly that is only found in the front of the vehicle.

What are the axle parts?

Wheel studs, axle bearings and splines are all axle parts. Other axle parts are C-clips, differentials and ring gears. Features such as spring pads, differential covers and gaskets are also required to assemble axles.

What does a rear axle assembly contain?

The rear axle assembly contains a differential and two axles. The differential is a set of gears and shafts that transmits power from the driveshaft to the axles. The axles are steel shafts that connect the differential and drive wheels, Figure 1-21.

What is a rear carrier assembly?

As the name implies, this type of carrier assembly is located at the front of the vehicle and is commonly called the transaxle. Rear carrier assembly. This type of carrier assembly is located at the rear of the vehicle and is what most people confuse with the rear differential.

How does an axle assembly work?

An entire axle assembly typically contains two half shafts located on each side of the differential. They are connected to the wheel bearing and allow the wheel to rotate. They may also be found in machines that require physical components to rotate, such as gears.

What does a CV axle connect to?

Answer: Constant velocity, or CV, joints are used to connect your vehicle’s transmission to your wheels. CV joints are part of the driveshaft and are used primarily on front-wheel drive vehicles, but they are also used in rear- and four-wheel drive vehicles.

What connects to the axle?

Axles can be found connected to the wheels of your car and responsible for bearing the entire weight of your vehicle. In rear-wheel vehicles, the drive axle is located in the back and is connected to the driveshaft which turns the drive axle. The CV joint is what connects the axle and wheel together.

What are the parts of wheel and axle?

The wheel and axle consists of a round disk, known as a wheel, with a rod through the centre of it, known as the axle. This system uses angular momentum and torque to do work on objects, typically against the force of gravity. The wheel and axle simple machine is closely related to gears.

What are the 3 major components of the rear axle?

Some independent rear suspension RWD vehicles have 2 Constant Velocity (C.V.) axle shafts that deliver power from the differential of an independent suspension system to the wheels. These are very common components broken during a collision. They are comprised of 3 major components: shaft, joint (2) and boot (also 2).

What is axle carrier?

An axle carrier is known by many names, such as chunk, differential and third member, each describing the component of a drive axle that houses the gear set. Gear lube is used in the axle housing to lubricate the gear set. Seals positioned in the axle tubes retain the lube inside of the carrier.

What is a differential carrier assembly?

A differential carrier assembly includes a differential carrier and a differential casing having a ring gear that is supported on right and left differential bearings for rotation about a differential axis. The right and left differential bearings are each supported in respective right and left bearing housings.