What is an Allen wrench with hole in the middle?

Bondhus Tamper Resistant (Security) L-Wrenches have a hole in the tip to accommodate a pin in the socket head fastener. Each tool is manufactured to the tightest tolerances in the hand tool industry.

What is a tamper resistant hex key?

Tamper Resistant Hex End L-Wrenches fit all tamper resistant hex screws. Chamfered tool tips eliminate burrs and help tools seat in screw head. The sharp corners transfer more torque to the screw which reduces stripping.

What is Torx key?

Torx Keys Information Torx keys are also commonly known as star keys. Like hexagon allen keys, most torx keys are small enough to be carried in a pocket and enable the user to drive the appropriate fasteners without needing a separate screwdriver or power tool.

What is a security hex wrench?

This Pin Hex Security Key Wrench is a form of Allen Key to be used with Pin Hex Security Fasteners. Pin Hex fixings are often used in higher torque applications, and find themselves in place of standard socket screws or other standardised fixings.

Is hex key same as Allen key?

A hex key, also known as an Allen key is a simple tool used to drive bolts and screws with hexagonal sockets in their heads.

What can I use instead of Allen key?

Sometimes you can use small types of flat headed screwdrivers as an allen wrench by putting the end in the socket so that the 2 edges of the screwdriver work as leverage in the hole to turn it. A wider socket on the bolt or nut, use a wider flathead screwdriver.

Where are Bondhus tools made?

Monticello, Minnesota
Bondhus Corporation is located in Monticello, Minnesota – USA; about 40 minutes from Minneapolis. Bondhus employees are proud of our Company and the tools we make. Our Ball, Hex, and TORX® tools are made in our Monticello manufacturing facility, just across the street from the Mighty Mississippi River.

What are L wrenches?

An Allen wrench is one of the simplest wrenches to use. The Allen wrench itself is a small L-shaped wrench with six sides. If you look at a cross-section of the Allen wrench, it looks like a hexagon. Since the Allen wrench has such a specific shape, it can only be used with items especially designed for it.

What is a TX bit?

Torx (pronounced /tɔːrks/) is a trademark for a type of screw drive characterized by a 6-point star-shaped pattern, developed in 1967 by Camcar Textron. A popular generic name for the drive is star, as in star screwdriver or star bits. Torx screws are also becoming increasingly popular in construction industries.

What is a T30?

Drive T30 Torx Bit Socket provides the end user to use a ratchet or driver on Torx fasteners. Torx® is a trademark of Acument Intellectual Properties, LLC.

What is the difference between an Allen wrench and a hex key?

This article is aimed to help you figure out the difference between an Allen wrench and a hex key. The short answer is “there is no difference”. Really, these two names can be used interchangeably.

Why does a ball end hex?

The ball end makes it easier to slide the key into the receiving slot. It allows you to reach at an offset 30 degree angle so that you can feel your way to the needed position much faster – great for blind or difficult areas to reach or if the bolt or screw is close to an obstruction on one side.

What are hexagon and Torx keys used for?

Hex, Ball-End Hex and Torx keys are used to drive hexagon and Torx recess cap screws, including socket head cap screws, countersunk (or flathead) cap screws, buttonhead cap screws, set screws and shoulder screws. Hex Keys: give you get more contact between the tool and the fastener compared to traditional slotted and Phillips® drive systems.

What is hex head tool?

A hex key is a tool used to tighten and loosen a screw or bolt, that has a hexagonal depression in its head. The tool may also be called a hex wrench, Allen wrench, hex-head key, zeta wrench, Alum wrench, or Inbus key.

What is a hexagon key?

A hex key, or hexagon wrench, is a six-sided tool used to tighten and loosen screws with a matching hexagonal shape . Hex-headed screws are used to put together furniture, and many ready-to-assemble furniture kits come with a hex wrench.

How is an allen wrench used?

In addition to assembling furniture, the Allen wrench is also commonly used for bike repairs . The unusual shape, plus the fact that the Allen wrench is small and light and capable of getting into hard-to-reach places on a bike, makes it particularly useful for cyclists to carry with them as they ride.