What is a Virtual Chassis?
Virtual chassis is very similar to a distributing computing concept called a single system image (SSI), which is a cluster of devices that appears to be a single device. The two routers R1 and R2 are joined together by a virtual chassis port (VCP) to form a virtual chassis.
What are three advantages of Virtual Chassis technology?
Virtual Chassis technology makes more efficient use of both access and uplink ports, optimizing rack space, power, and cooling resources.
How do I get rid of virtual chassis configuration?
To delete an MX Series Virtual Chassis configuration, you must:
- Delete all Virtual Chassis ports.
- Remove the definitions and applications of the Virtual Chassis configuration groups.
- Delete the preprovisioned member information configured at the [edit virtual-chassis] hierarchy level.
- Delete any configured interfaces.
What is Juniper VCF?
The Juniper Networks Virtual Chassis Fabric (VCF) provides a low-latency, high-performance fabric architecture that can be managed as a single device. VCF is an evolution of the Virtual Chassis feature, which enables you to interconnect multiple devices into a single logical device, inside of a fabric architecture.
How does virtual chassis work?
The interconnected member switches in a Virtual Chassis operate and can be configured as a single network entity. The serial console port and dedicated out-of-band management port on individual switches have global virtual counterparts when the switches are interconnected in a Virtual Chassis configuration.
What is VCP in Juniper switch?
A Virtual Chassis port (VCP) in an EX8200 Virtual Chassis is any port whose function is to send and receive Virtual Chassis Control Protocol (VCCP) traffic to create, monitor, and maintain the Virtual Chassis.
What is spine leaf architecture?
A spine-leaf architecture is data center network topology that consists of two switching layers—a spine and leaf. The leaf layer consists of access switches that aggregate traffic from servers and connect directly into the spine or network core. Spine switches interconnect all leaf switches in a full-mesh topology.
What is IP fabric Juniper?
©2019, Juniper Networks, Inc. IP Fabric EVPN-VXLAN Reference Architecture. Multihoming. Multihoming Support for Ethernet-Connected Systems. The Ethernet-connected multihoming technology enables Ethernet traffic to be load-balanced across the fabric between VTEPs on different leaf devices connected to the same end …
How many Juniper switches can you stack?
You can interconnect up to ten EX4600 switches or a combination of up to ten EX4600 and EX4300 switches into an EX4600 Virtual Chassis.
Can you stack Juniper switches?
What is the main benefit of spine-leaf architecture?
The primary benefit of a leaf-spine architecture is that it allows data flows to take shortcuts from where data is, to where it is going. Layer 3 data flows within traditional three-tier architectures can vary depending on where the source and destination devices reside on a network.
