What is a Line station in aviation?
The Line Station performs maintenance, modifications, repairs and alterations of Flight Inspection and customer aircraft under the Federal Aviation Regulation Parts 135 Air Operator or Part 145 Certified Repair Station.
What is a FAA repair station?
The term Repair Station refers to a maintenance facility that has a certificate issued by the FAA under Title 14 of the Code of Federal Regulations ( 14 CFR ) Part 145 and is engaged in the maintenance, inspection, and alteration of aircraft and aircraft products.
What is a D107?
The D107 is an authorization for a specific maintenance function and air carrier at a specified location.
What is a repair station rating?
Repair stations are issued limited ratings for the performance of maintenance, preventive maintenance, and alterations on particular M/Ms of airframes, powerplants, propellers, radios, instruments, accessories, and/or parts thereof; or if it performs only specific maintenance functions or a specialized maintenance …
What are buttock line stations?
a buttock line is a vertical plane that is parallel to the center line. buttock lines are distanced measured in inches, right and left from the vertical centerline of the fuselage. These lines run parallel to the vertical centerline. These lines are numbered just as fuselage stations are numbered.
What is the purpose of slats?
Slats are extendable, high lift devices on the leading edge of the wings of some fixed wing aircraft. Their purpose is to increase lift during low speed operations such as takeoff, initial climb, approach and landing.
What are the requirements for a FAA repair station?
FAA requires that air carriers and their contractors fully comply with federal regulations. An organization wishing to become certified as an FAA repair station must complete a pre-application, a formal application, document compliance, demonstration and inspection.
What is an FAA MRO?
MRO stands for maintenance, repair and overhaul. Aviation MRO refers to the specific repair, service or inspection of an aircraft. The practice encompasses that of all maintenance activities done to ensure the safety and airworthiness of an air transport vehicle.
What is a Class 3 aircraft?
Class III airplanes, which typically are all Part 23 aircraft equal to or more than 6,000 pounds. Class IV airplanes, which typically are commuter category airplanes. All weights are based on maximum certificated gross takeoff weight.
What is EASA 145 certification?
European Aviation Safety Agency (EASA) Part 145 Approval is a company level certification to the European Commission Regulation standards of design, production, maintenance and operation of aircraft components. An aircraft component is described as any product, part, or appliance installed in European aircraft.
What is the difference between fuselage station and water line station?
Often in aircraft design, the horizontal coordinate system will start some distance before the nose. The X-axis of this system is positive pointing aft and is typically called the fuselage station (FS) in the case of an aircraft. The Z-axis is positive pointing upward and is known as the water line (WL).
What is the waterline of an aircraft?
In aircraft design, the term “waterline” refers to the vertical location of items on the aircraft. This is (normally) the Z axis of an X × Y × Z coordinate system, the other two axes being the fuselage station ( X ) and buttock line ( Y ).
What does FAA mean by Federal Aviation Administration?
A document developed by the airplane manufacturer and approved by the Federal Aviation Administration (FAA). It is specific to a particular make and model airplane by serial number and it contains operating procedures and limitations. Airplane Owner/Information Manual.
How many classes of aircraft are there in the FAA?
This category contains four classes of aircraft: airplanes and gliders, powered parachutes, weight-shift-control, and lighter-than-air aircraft. The factors of intended aircraft use, operating limitations, and privileges of this category place it in hierarchy between the primary and experimental categories.
What does the FAA mean by Interstate Commerce?
Interstate, overseas, or foreign air commerce or the transportation of mail by aircraft or any operation or navigation of aircraft within the limits of any Federal airway or any operation or navigation of aircraft which directly affects, or which may endanger safety in, interstate, overseas, or foreign air commerce.
What is the definition of an aircraft classification?
Aircraft Classification. The term “classification,” as used with respect to the certification of aircraft, means a broad grouping of aircraft having similar characteristics of propulsion, flight, or landing, that is, airplane, rotorcraft, glider, or balloon.
