What is a good height for a table saw?

When it comes right down to it, the proper height for your table saw depends on your height. While the average height tends to be 34 inches and the standard range is between 31 and 38 inches, the best choice for you will fall right about even with the distance of your thumb knuckle from the floor.

How thick can an 8 1 4 table saw cut?

The new Dewalt DWE7485 table saw features a 8-1/4″ blade and up to 24.5″ rip-cutting capacity. The saw comes with a fence, riving knife, anti-kickback pawls, miter gauge, and push stick, as well as on-board storage for everything.

How thick can an 8 table saw cut?

The 8-inch blade will probably only be able to cut about 3 inches deep, but it will be able to complete more revolutions per minute, sawing through materials with great alacrity.

Why was the dwe7480 discontinued?

10 inch saws in this format are being discontinued due to regulatory requirements. All the new portable table saws are 8 inch. So if you want a 10 inch now is the time to grab one.

Can you use a 10 blade on a 8 table saw?

Yes you can. Smaller blades can run faster since their mass is closer to the axis of rotation (I think), so they can be made thinner. But, the RPM of a smaller blade will be the same as that of a larger blade, and in fact the cutting edge will be moving slower. In other words: the blade isn’t in danger.

Can I use a dado blade on DWE7485?

Despite the smaller saw blade, the DWE7485 weighs 10 lbs. Like the other DeWALT job site saws, you cannot add a dado stack. This isn’t exclusive to this model, but that’s a deal breaker to a lot of woodworkers.

Can a table saw cut a 4×4?

A standard 10 inch table saw can’t cut all the way through a 4×4 in one pass. A high-end table saw with a 12 inch blade can cut a 4×4 in one pass with maximum cut of about 4 inches.

Can a 10 table saw cut a 2×4?

You can rip 2 x 4 on a table saw effectively provided you set the rip fence correctly, use proper technique and use the right tools. The proper technique while ripping a 2×4 is to apply pressure in three directions, that is, against the rip fence, forward (for pushing the wood), and downwards for keeping the wood flat.

What is the difference between DWE7480 and DW745?

For instance, the DW745 is lighter, cheaper, and a little better in terms of the overall warranty. The DWE7480 is more powerful and offers a greater rip capacity for larger workpieces. Both models are popular among their respective users.

What is dado saw blade?

A dado blade is a circular saw blade that cuts grooves into the wood that are much wider than traditional saw blade cuts. They are used for interlocking applications. You can use other methods to achieve the wide groove cut without a dado blade, including using a clamp guide with a handheld router or miter saws.

What’s the maximum depth of cut on an 8 inch table saw?

The maximum depth of cut was 1 1/4 inches. When the saw blade was tilted 45 degrees to the right, a 1 9/16″ depth of cut could be obtained with an 8 inch blade. The “Auto-Set” miter gauge was adjustable for cuts at any angle up to 60 degrees right or left.

How big is the blade on a cordless table saw?

Many cordless table saws running around have blades in the 8-1/4″ range. These require you to give up some cutting depth. If you need maximum depth, you get more versatility out of a table saw with a 10″ blade. For benchtop and jobsite saws with direct drive motors, the motor RPM is the blade RPM.

What kind of motor does an 8 inch table saw have?

This was a capacitor start, 115 volt, 60 cycle, 1725 r.p.m. motor with ball bearings and a 5/8″ diameter shaft. The motor speed of 1725 rpm ran the arbor at 3850 rpm or the 8 inch saw blade at 8100 surface feet per minute. This guard completely protects the operator from the motor pulley and V-belt.

How to read 8-1-4 in.compact Jobsite table saw?

Read reviews for 8-1/4 in. Compact Jobsite Table Saw This action will navigate to reviews. Select a row below to filter reviews. 33 reviews with 5 stars. Select to filter reviews with 5 stars. 4 reviews with 4 stars. Select to filter reviews with 4 stars. 2 reviews with 3 stars. Select to filter reviews with 3 stars. 2 reviews with 2 stars.