What is a Class 2 rapids?
Class II: Easy rapids with smaller waves, clear channels that are obvious without scouting. Class III: Rapids with high, irregular waves. Narrow passages that often require precise maneuvering. Class IV: Long, difficult rapids with constricted passages that often require complex maneuvering in turbulent water.
What makes a class 5 rapid?
Class V: Extremely difficult, long, and very violent rapids with highly congested routes, which should be scouted from shore. Rescue conditions are difficult, and there is a significant hazard to life in the event of a mishap. The upper limit of what is possible in a commercial raft.
What is a Class 1 rapid?
Class I Rapids » Class I rapids are defined by moving water with small waves that tug at the boat in a downstream flow – it’s a relaxing way to spend the day. Rafting trips on class I whitewater are generally labeled as “scenic float trips”.
What class Rapid is Niagara Falls?
Class 6
A Class 6 rapids, like Niagara’s, involves “the difficulties of Class 5 carried to the extreme. Nearly impossible and very dangerous.”
What is the highest rapid class?
The International Rating system classifies rapids as follows:
- Class A – Lake water. Still.
- Class I – Easy.
- Class II – Moderate.
- Class III – Moderately difficult.
- Class IV – Difficult.
- Class V – Extremely difficult.
- Class VI – Extraordinarily difficult.
What are level 3 rapids?
Class 3- beginner / (intermediate) level Rapids, eddies and moderately strong waves become harder to navigate. You can expect to be getting wet at this level. Performing maneuvers, and boat control, is key to running class 3 rapids.
What is Class II rapids?
Class II rapids are considered novice level with straightforward rapids that have wide, clear channels evident without scouting. While occasional maneuvering may be required, rocks and medium-sized waves are easily missed by trained rafters.
What is Class V rapids?
Class V – Class V Rapids have a minimum age of 15 and are considered extremely difficult. These are long continuous rapids that often flow into each other with almost no interruption. Good physical condition is required to take on a class V section.
What is a Class 3 rapid?
Class III rapid at Canolfan Tryweryn, Wales. The international scale of river difficulty is an American system used to rate the difficulty of navigating a stretch of river, or a single (sometimes whitewater) rapid. The scale was created by the American Whitewater Association to evaluate rivers throughout the world, hence international in the title.