What does it mean when your maintenance light blinks?
It’s basically just telling you that your car will need some kind of scheduled service soon. It could be an oil change, a tuneup, or maybe you need a new timing belt. When the light begins to flash at startup, you have about 500 miles or so to go before the next scheduled service.
What does the maintenance required light mean Acura RSX?
This is an alert for you to make an appointment for car service because you are getting close to the 5,000-mile service interval. The maintenance required light will remain on and be solid after the mileage interval reaches 5,000 miles since the light was reset.
How do you turn off the maintenance required light on a Acura RSX?
Turn the ignition switch to the OFF (0) position. Press and hold the Select/Reset button(s) in the instrument panel, then turn the ignition switch to ON (II) position. Hold the button(s) for 10 seconds or until the indicator resets.
How do you reset the oil light on a Acura RSX?
Reset service oil light Acura RSX
- Turn the key to off position.
- Press and hold the SELECT and RESET buttons on the instrument panel and turn the ignition to position (II) do not start engine.
- Hold the SELECT and RESET buttons until the indicator resets, 10 seconds.
Is it safe to drive with maintenance light on?
This light is turned on automatically every 5,000 miles as a warning sign, so you don’t forget to change the oil in your car. It’s important to know that the light itself doesn’t mean that your car is damaged, so you can still safely use your vehicle while the light is on in your dashboard.
Can I drive with maintenance required light on?
Secondly, resetting the maintenance required light after you have changed the oil restarts the counter. As a result, you can drive safely on roads and after 5,000 miles, this light will automatically remind you it’s time for a new oil change, so you don’t have to count the miles manually.
Why is my check engine light on RSX?
Whenever the Check Engine Light is on there’s a possibility the engine is emitting excessive emissions out the tailpipe. Whether you experience performance problems or not, a flashing CEL indicates that an engine misfire has occurred.
How do you reset the oil life on a 2006 Acura CSX?
2007-2011 Acura CSX Service Light Oil Life Indicator Reset
- Turn the ignition key to position “ON” (II) without starting the engine.
- Press the Select/Reset button repeatedly until the “Oil Life Percentage” appears on the display.
- Press and hold the button until the oil life percentage begins to blink.
How long can you drive with oil light flashing?
Generally speaking, you have about 2 weeks or 500 miles of driving before a flashing oil light turns into a legitimate problem. But once it hits that point, things can go downhill fast, leading to serious mechanical damage. So, try to get your vehicle into a mechanic sooner rather than later.
How long can a car go after the change oil light comes on?
On vehicles with an oil change light, an oil change is needed when the light remains on after startup. It’s best to schedule the oil change within one to two weeks. If you primarily do highway driving, you have a little more breathing room than city driving.
