What does CL mean on heater?

CL10, CL9, etc. is displayed on Digital Indicator. IF THE CLOCK IS SET, the heater will automatically clean igniter for ten minutes every day at 2:00AM. The Digital Indicator will display a CL 10, CL 9, (down to 0) during the cleaning cycle.

Are Toyotomi Heaters good?

Toyotomi sealed combustion direct vent heating systems (TOYOSTOVE, Laser, and OIL MISER models) are the most fuel-efficient, energy saving, heating systems available (use up to 50% less fuel for heating the same area) and have substantially lower emissions (up to 50% less CO²) than traditional oil-fired heating systems …

What does EE2 mean in toyostove?

The EE2 code means that the flame sensor did not detect a flame during the ignition and pre-heat stage. The EE6 code means that the flame sensor has lost flame contact twice after the unit reached the normal burning stage.

What does E 6 mean on a Toyostove?

Fuel line malfunction
Toyostove Error Codes For Newer Models Laser 300, 530, 560, 60AT, 730, 730AT

How do you fix an E1 error on a heater?

Error E1 is displayed on the control panel. The overheat sensor has been turned on. The sensor will reset if the unit is unplugged. The unit needs to be plugged back in.

Why does my Magnavox heater turn off?

Overheat Safety Feature When the internal components of the heater reach a certain temperature that could cause overheating or possible fire, the heater will automatically shut off . If the unit has been overheated, you will need to unplug the unit from the wall and replug it in to use the heater again .

Are monitor heaters still being made?

Monitor heaters have been discontinued and because of this, many are wondering what options they have. Many residents chose the Monitor kerosene heater, and up to 75,000 homes and businesses are warmed by the units today. The Japanese manufacturer, Hitachi, has stopped making the heater.

What is a Laser vented heater?

A Laser vented heater is the perfect solution for those hard to heat rooms or areas — all too common in many homes today. A Laser heater provides all the comfort and convenience of a central heating system in one small, efficient unit at a fraction of the cost.

What does EE mean on a Toyostove?

An EE 2 or EE 6 can be an indication it is time to service the stove (Clean burner assembly, heat chamber, heat exchanger, and exhaust fan (L56, 60, 73); Replace burner mat (Laser 73) or burner coating (all other models) and gaskets.) Warning: Do not use coating in Toyostove Laser 73. The coating will cause the burner.

Why does my heater keep saying E1?

How do you reset a Magnavox heater?

To manually reset: Turn Power to Off and unplug the unit from the wall outlet for 5 minutes. After 5 minutes, plug the unit back into wall outlet, and operate as normal. If this doesnt work do the Master Reset, which is : turn off and unplug unit, Hold down main power button on the unit itself.

What are the error codes on the toyotumi laser 73?

The Toyotumi Laser 73 is a simple, reliable stove. Things I did to troubleshoot my fuel-related problem. 1.) Define Error Codes EE2 Error Code = Heater does not ignite. EE6 Error Code = Heater does run through its pre-start sequence, ignites for a short time, then goes out.

What kind of kerosene heater does Toyotomi use?

Izuru(DC INVERTER) Hiro(DC INVERTER) SATORI(DC INVERTER) NOBORU(DC INVERTER) Air Cleaner ETK-S50 AC-20 Dehumidifier Compressor Type TD-C210 TD-C1410 TD-C1412

Why are the flames on my toyostove laser 73 yellow?

With the stove running, the flames can be observed through the front louvers. They look a bit too yellow on my stove, which means the unit and flue may need to be cleaned. They should be blue. I’m not going to do that cleaning now.

What kind of fuel does toyostove laser 73 use?

The stove uses #1 heating oil, which is crystal clear kerosene or ultra low sulfur diesel, dyed pink for “off road only” use. Fuel leaves the tank, runs through the filter, through a 3/8″ copper tube through the wall into the house.