What does C0660 code mean?
C0660 REPAIR SERVICE TRACTION CONTROL.
What is a level control exhaust valve?
Level Control Exhaust Valve Circuit Short to Ground or Open. Circuit/System Description. The automatic level control (ALC) system uses an exhaust valve to release air from the rear shocks to lower to trim height, or during a compressor head pressure relief cycle. Battery voltage is supplied to the valve.
How do you reset the service ride control on a Cadillac Escalade?
When the Ride Control error code comes up—you will need the codes for your model year— press erase. The position varies on different readers but it will be prominent and red. Pushing the erase button will reset the module. Unplug the reader and turn the car on.
What does it mean when it says service ride control?
It means that your compressor is out. The shocks have air bags on them and they get holes in them or rupture if you don’t decompress them before you lower your vehicle if it’s on a jack.
What is TC light on Cadillac Escalade?
The traction control warning light typically takes the form of the acronym “TC.” Sometimes this light is a small illuminated picture of a car losing control.
What is a ride control on a Cadillac Escalade?
Cadillac Magnetic Ride Control is an adaptive damping system that can read road conditions every millisecond and change the vehicle’s damping settings every five milliseconds. The system can be set to Tour mode for comfortable cruising or a Sport mode for better handling.
What does service suspension system mean on a Cadillac Escalade?
Condition 2: There is a “Service Suspension System” message on the DIC and the rear suspension ride height may be lower than normal under a heavy payload. Upon inspection, it may be determined that the hose is damaged or has become disconnected from the air inlet filter of the ALC suspension air compressor.
What causes Service Ride Control?
It means that your compressor is out. The shocks have air bags on them and they get holes in them or rupture if you don’t decompress them before you lower your vehicle if it’s on a jack. The compressor burns itself out after a few days of constantly trying to fill the airbags.
Can you drive with traction control light on?
Is it Safe to Drive with the TCS Light On? It is only safe to drive with the TCS light on if it appears when you are losing traction: it means the system is engaging. Driving without traction control can make your vehicle susceptible to spinning out and sliding around on the road.
How do I clear a StabiliTrak code?
How To Reset Service Stabilitrak Light
- Step 1: Turn the handwheel clockwise. (If it shuts off, the vehicle does not need service, otherwise, follow the other steps.)
- Step 2: Turn off the vehicle.
- Step 3: Wait 15 seconds.
- Step 4: Turn the vehicle on.
How do I know if my Escalade has magnetic ride control?
just check the shocks front and back, if there is a wire coming out of it, it has MRC. the front, the wires comes out from the top.
