What do I do when my HP printer says paper jam but there is none?
Sometimes a paper jam error persists even though there is no jammed paper (false paper jam). Reset the printer, which might clear a false paper jam error, and then try to print again. With the printer turned on, disconnect the power cord from the printer. Unplug the power cord from the power source.
Why does my HP Officejet Pro keep jamming?
Check inside the printer for any debris that might be causing paper jams. Turn off the printer, and then unplug the power cord from the electrical outlet. Remove any paper from the input tray. Open the rear access door, and then clean the paper feed rollers with a lint-free cloth lightly moistened with filtered water.
How do I bypass printer jam?
- Open the top cover of Tray 5 (Bypass).
- Remove the jammed paper and any paper that is loaded from the Bypass Tray. Note:If paper is torn, check inside the machine and remove it.
- Open the tray cover, then remove the jammed paper.
- Close the tray cover.
- Reload the paper into the tray, then resume copying or printing.
Why does my printer keep saying paper jam when there is no paper jam?
The guides in the paper tray are there to make sure the stack of paper is exactly where the printer was designed to grab from. If the paper is even slightly askew, the rollers will pick it up a little crooked, and — guess what — the crooked sheet will immediately get jammed.
Why does my printer keep having paper jams?
This is one of the most common causes of paper jams. Loading paper that is stuck together, frayed, curled or bent can cause a jam. Overloading the paper tray, loading different thicknesses of paper in the tray or using paper that isn’t appropriate for your particular printer can all result in a jammed printer.
Why does my printer keep printing paper jam?
If your printer keeps jamming, you should know that the most common cause of a jam is misalignment of the paper. Paper needs to load in smoothly, completely flush with the tray. Overfilling the tray is a great way to ensure you will be spending some personal time getting to know the inside of a printer.
Why does my printer say there is a paper jam when there isn t?
The guides in the paper tray are there to make sure the stack of paper is exactly where the printer was designed to grab from. So even though there’s no paper stuck when you start printing, the loose paper guides are ensuring that a sheet gets jammed whenever the printer starts doing its thing.
Why is my printer getting jammed?
Where is the gear stick on the Officejet Pro 8500?
The “gear stick” selecting “clean prinheads” or “feed paper” etc is on the left hand side of the printer paper feed shaft. You can see it by lifting the cover and pearing inside. The broken cog is within a removable black plastic casing – the casing is clearly seen and has a little “finger” extending out of the left had side of the casing.
What to do if you have Paper Jam on HP printer?
Unplug the power cord from the wall outlet. Turn the printer around so that you can access the rear side. Push in the button on either side of the two-sided printing accessory (duplexer), and then remove the duplexer. Your printer might look slightly different than the one pictured, but the steps are the same.
How to prevent Paper Jam in HP Photosmart C3100?
The following recommendations can help prevent recurring paper jams in your HP product. Before loading paper in the tray, hold the stack of paper, and then tap the bottom edge on a flat surface so that the stack is even on all sides.
