What diameter is a M16 bolt?
Metric Hex Bolt Dimensions
| NOMINAL SIZE (D) | BODY DIAMETER | ACROSS THE FLATS |
|---|---|---|
| m10 | 10.00 | 15.73 |
| m12 | 12.00 | 17.73 |
| m14 | 14.00 | 20.67 |
| m16 | 16.00 | 23.67 |
What size is a M16 bolt in inches?
Table 3.
| Metric | Closest Inch |
|---|---|
| M12-1.75 | 1/2-13 (Larger) |
| M14-2.0 | 9/16-12 (Larger) |
| M16-2.0 | 5/8-11 (Smaller) |
| M18-2.5 | 3/4-10 (Larger) |
What is the head size of M16 bolt?
x 55mm
M16 x 55mm Hexagon Head Bolt.
How are M16 bolts measured?
Measure the length from underneath the head to the end of the bolt. This includes the shank, if your bolt has one. A shank is an unthreaded part underneath the head. If you are measuring a countersunk screw make sure to measure the entire length.
What size is M18 bolt?
Dimensions for DIN931 Hex Head Bolt
| Diameter (d) | Pitch | Head Depth (k) |
|---|---|---|
| M14 | 2mm | 8.8mm |
| M16 | 2mm | 10mm |
| M18 | 2.5mm | 11.5mm |
| M20 | 2.5mm | 12.5mm |
What is M16 nut?
Metric bolts are made fractionally under their stated size, for instance an M16 bolt will have a shank diameter of typically 15.97mm. This means that a 16mm bolt will fit through a 16mm hole but to allow for misalignment between parts it is common practice to drill bolt holes slightly larger.
What is M18 thread size?
Thread Geometry – Metric Coarse
| Thread | Major Diameter | Pitch Diameter |
|---|---|---|
| M12 | 12.0 | 10.863 |
| M14 | 14.0 | 12.701 |
| M16 | 16.0 | 14.701 |
| M18 | 18.0 | 16.376 |
Is an M12 bolt 12mm?
M12 bolts are a metric sized bolt with a 12mm thread diameter.
What does 8.8 mean on a bolt?
So, in English, a PC 8.8 bolt is a bolt with a nominal tensile strength of 800 MPa and a nominal yield strength that is 80% of the bolt’s nominal tensile strength, or 640 MPa.
Is M16 a 16mm?
M16 (16mm) Hex Nut – Steel (Pack of 10)
What does M mean in bolt sizes?
M = This designates the fastener is a metric size. 10 = The nominal diameter in millimeters. 1.0 = The thread pitch, or distance between threads, in millimeters. 20 = The fastener’s length, in millimeters.
What is the most common bolt size?
Common Bolt Sizes. The most common sizes for wheel lug nuts are 7/16-inch, 1/2-inch, 9/16-inch, 5/8-inch, 12 mm, and 14 mm. In addition to these sizes, automotive engines may also have 1/4-inch, 5/16-inch, and 3/8-inch bolts.
What size is a M16?
The M16 is a lightweight, 5.56 mm, air-cooled, gas-operated, magazine-fed assault rifle, with a rotating bolt.
What is M16 thread pitch?
With metric threads tapping drill size is easy to work out because it is the bolt diameter minus the thread pitch so, for example, a standard pitch M16 bolt has a pitch of 2.0mm so the tapping drill size is 16 – 2 = 14mm.
What is the diameter of a bolt?
Typically, machine bolt sizes range from 1/4″ to 1 1/4″ for square heads and 3/8″ to 1 3/4″ in diameter for hex heads, and lengths span from about 3/4″ to 18″ for square and 6 1/2″ to 24″ for hex heads. Measure length from under the head to the threaded end of the bolt.
