What caliber is ramset?

Compare with similar items

What should be done with a bad cartridge in a powder actuated tool?

If a powder-actuated tool misfires, OSHA requires you to follow these steps: * Hold the tool in the operating position for at least 30 seconds, then try to use it again. * If the tool still won’t fire, wait another 30 seconds to reduce the chance that the faulty cartridge will explode.

What is the most powerful ramset?

The Most Powerful Tool We Offer! The Ramset XT540 was specifically designed for heavy-duty interior & exterior applications. The XT540’s combination of high power and durability make it perfect for demanding applications.

Why are powder actuated tools dangerous?

Studs ricocheting if the tool is not held properly or is being used on too hard a material. 4. Fire hazards from using the tool when flammable or explosive dust or fumes are present. Using the tool powder charges in fire arms or using firearm blanks in powder-actuated tools.

Is a Ramset a firearm?

A powder-actuated tool (PAT, often generically called a Hilti gun or a Ramset gun after their manufacturing companies) is a type of nail gun used in construction and manufacturing to join materials to hard substrates such as steel and concrete.

How deep should Ramset nails go?

Recommended minimum fastener spacing. The recommended MINIMUM DISTANCE between fastening is three (3) inches.

How should you fire a powder-actuated tool to make sure it doesn’t fire accidentally?

s Ne ver fire through or into a hole; the fastener could strike the edge of the hole. If the tool doesn’t fire after pulling the tri g g e r, continue to hold the tool against the work surface for at least 30 seconds. Then carefully re m ove the powder load and discard it in a safe place—not a trash container.

Who is permitted to use powder-actuated tools?

employees
Only employees who have been trained in the operation of the particular tool in use shall be allowed to operate a powder-actuated tool.

How far should ramset nails go into concrete?

Setting fasteners too close together can cause the concrete to crack. The recommended MINIMUM DISTANCE between fastening is three (3) inches.

How should you fire a powder-actuated tool to make sure it doesn’t fire?

Where must shot for powder actuated tools be stored?

Powder-actuated tools use an explosive cartridge or gas equipment. and function testing. It must require two separate actions before it will fire: Pressure against the surface of the material; action of the trigger. It must be stored in a locked container when not in use or when left unattended.

What do you use Ramset 0.27 red strip loads for?

The Ramset 0.27 Caliber Red Strip Loads 100 Count come with 10 red strips each containing 10 powder loads. These loads can be used in the Ramset SA270, Viper and Cobra tools and provide the power to break through concrete and hollow block. Use with the Ramset SA270, Cobra+ and Viper tools Provide the power to penetrate hollow block and concrete

What do you need to know about Ramset?

Ramset offers a service for users who need tool repair or replacement parts for their Ramset products.

How long does it take Ramset to respond to emails?

Note: Ramset will make every attempt to respond to emails within 48 hours. Downloads are .pdf Adobe Acrobat Files and require Adobe Acrobat Reader to view and print. If you do not have Adobe Acrobat, click on the icon below to download a free copy.