What are the 5 steps in using a fire extinguisher?
A: Aim the extinguisher nozzle on the hose low, toward the base of the fire. S: Squeeze the handle or lever to discharge the extinguisher. S: Sweep the nozzle back and forth. Keep the fire extinguisher aimed at the base of the fire and move it from side to side until the flames are extinguished.
Where do you point a fire extinguisher?
Aim the nozzle, horn, or hose of the fire extinguisher at the base of the fire (this means the bottom, where the stuff that’s burning is located). A common mistake is to aim into the flames. This won’t put out the fire.
What is the 4 letter word for the correct use for a fire extinguisher?
So, in review; here are the four steps to take when using an extinguisher to put out a small fire. And they can be as simple as remembering PASS – which stands for Pull, Aim, Squeeze, and Sweep.
How do you use a fire extinguisher essay?
Using a fire extinguisher
- Pull: Pull the pin, this will break the tamper seal.
- Aim: Aim low, pointing the nozzle or hose at the base of the fire.
- Squeeze: Squeeze the handle to release the extinguishing agent.
- Sweep: Sweep from side to side at the base of the fire, the fuel source, until the fire is out.
What is the correct sequence for using a fire extinguisher?
How To Use a Fire Extinguisher. It’s easy to remember how to use a fire extinguisher if you can remember the acronym PASS, which stands for Pull, Aim, Squeeze, and Sweep. Pull the pin. This will allow you to discharge the extinguisher.
What is Step 1 of the pass technique?
The PASS Technique for Using a Fire Extinguisher* PULL the pin: The handle on top of the canister should have a pin going through it to prevent accidental discharge. Remove this pin. SWEEP the nozzle from side to side: Once fire suppressant is coming out, use a sweeping motion to thoroughly smother the fire.
What word to remember when using a fire extinguisher?
Pull, Aim, Squeeze, and Sweep
It’s easy to remember how to use a fire extinguisher if you can remember the acronym PASS, which stands for Pull, Aim, Squeeze, and Sweep.
How do you use a fire extinguisher pass?
It’s easy to remember how to use a fire extinguisher if you can remember the acronym PASS, which stands for Pull, Aim, Squeeze, and Sweep. Pull the pin. This will allow you to discharge the extinguisher. Aim at the base of the fire.
What can a fire extinguisher template be used for?
This annual fire extinguisher template can be used to determine if the equipment has undergone proper maintenance. It can be used by approved extinguisher servicing professionals to identify defects and whether remedial action is required.
How to insert a bullet point symbol in word?
All the symbols in Microsoft Word have a unique code that can be used to insert the symbols into Word. These codes are known as Alt code. The Alt code for the Bullet Point Symbol is 0149. To insert the bullet point symbol into Word using the Alt Code, please obey the instructions below:
What do you call a fire extinguisher inspection form?
Also called a fire extinguisher inspection form, it allows inspectors to record details about the fire extinguishers and other observations such as the exact location and its current condition.
What is the alt code for a bullet point?
These codes are known as Alt code. The Alt code for the Bullet Point Symbol is 0149. To insert the bullet point symbol into Word using the Alt Code, please obey the instructions below: Place the insertion pointer at where you want to insert the symbol.
