What are stock panels?

Livestock panels (also known as feedlot cattle panels) are designed for use with livestock, of course. That’s why you’ll find them for sale at farm supply stores. Here in the Atlanta area, I buy these panels at Tractor Supply Company. A typical panel is constructed of a grid of openings 8” high x 6” wide.

How much does a 16 foot cattle panel weight?

Weight per panel is approximately 36 lbs each.

What is goat panel?

Sheep and goat panel fence has different vertical spacing to block the livestock in certain area safely and effectively. The panel fence is designed with different horizontal wire spacing from the bottom to the top, which effectively prevents the livestock escaping from the fence.

How long is a stock panel?

Typically made from welded, four-gauge, galvanized wire, standard cattle panels are 16 feet long and 50 inches wide. They are straight, not rolled like fencing. Cattle panels can be found at various farm supply stores. The panel is bent into an arch and attached to stakes hammered into the ground.

How big is a cow panel?

16 feet long
Cattle panels usually measure 16 feet long by about 50 inches wide, and the openings in the grid range from 4 to 8 inches, with some variation depending on the model and manufacturer.

How long do cattle panels last?

Pressure-treated lumber will last for about seven years without painting or staining, but it carries a higher cost than untreated lumber. That’s the reason why wood is rarely used today for perimeter cattle panels of large pastures, its strength makes it a choice only for small pastures.

Can I use cattle panels for goats?

Cattle panels (utility panels) They are easy to install using t-posts every eight feet. While the cattle panels don’t work well with horses, they do work very well to keep goats in, although young kids can sometimes get through the holes.

Will cattle panels rust?

Cattle panels are not your frail, fancy trellises, prone to rust and breakage. These suckers are sturdy and will last for many years in your garden.

How tall are livestock panels from Agri supply?

With livestock panels from Agri Supply, you can build pens or corrals in any shape you wish for a variety of livestock. We have cattle panels that are 50 inches tall and 16 feet long, made of 4 gauge wire. Our hog panels are of the same construction, but 34 inches tall with more cross wires.

What can you do with a livestock panel?

Along similar lines as the shelters mentioned above, is the potential of using livestock panels for a greenhouse. With the addition of a framed based, some framing for a door, and some greenhouse plastic, livestock panels can easily be used for a hoop house or greenhouse type structure.

What kind of wire is used for livestock panels?

These heavy duty Welded Livestock Panels are constructed from heavy weight galvanized wire rods. The wire rods are welded at every intersection and are heavily galvanized with a thick zinc coating. Welded Livestock Panels are ideal for loafing areas, corrals, feedlots, arenas, and working pens.

How big is a welding panel for a stall?

Ideal for runs, paddocks, arenas, stallion pens, stall fronts & dividers and temporary stalls. Manufactured with a galvanized before welding process, this 16′ x 5′ panel combines 6″ x 6″ spacing and 1 gauge wire rod to keep the animal from going over or through this strong built panel.