Is the TP-Link td-w8970 V1 compatible with OpenWrt?
The TD-W8970 v1 is a 450Mbps Wireless N Gigabit ADSL2+ / VDSL2 Modem Router, wrongly advertised as a 300Mbps and only ADSL2+ capable product. The Router is based on a Lantiq SoC. The TD-W8970 v3 is a Broadcom router which is not supported by OpenWrt. The TD-W8970 v1 is very similar to the TD-W8980 and TD-W9980.
Can a third party firmware replace TP-Link?
Added the port filter function in the DHCP server configuration. Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware.
Is the td-w8901g V6 modem router available?
IMPORTANT : Model and hardware version availability varies by region. Please refer to your TP-Link regional website to determine product availability. For TD-W8901G v6 hardware version. How to configure Access Control (ACL) on TP-Link ADSL2+ modem router? (Trendchip Solution) 05-25-2016 342820
Is there a way to open a td-w8960n?
TD-W8960N is a little tricky to open. Using your hands and a small screwdriver, try to open the upper and lower part (both are white) so that you can grab the 2 black laterals and push them a little. Don’t force it! Near the leds, there are 2 snaps. Using a flat screwdriver, try to open them from the inside.
How to login to td-w8970 router web UI?
Login to the router web ui at 192.168.1.1 and upload the new conf_modified.bin. And let the router reboot. Router will reboot and have TD-W8970 v1`telnetd -p 1023 -l login` at the top, this is expected.
How to access Linux shell on td-w8970 router?
Steps to access the linux shell using telnet for the TD-W8970 v1 firmware version0.6.0 2.12 v000c.0 Build 140613 Rel.31066n. Without opening the router physically. Login to the router web ui at 192.168.1.1.
How to open OpenWrt on a USB stick?
Create folder td-w8970 on your usb stick/thumb drive then copy these two files over the newly created folder. Unmount/eject the usb stick and plug it into the usb port on the back of TD-W8970. Open telnet and connect to 192.168.1.1 with login/password both as admin. Type sh after logging successfully.
