Is a cardioid mic better?
Cardioid mics capture everything in front and block everything else. This front-focused pattern will let you point the mic to a sound source and isolate it from unwanted ambient sound, making it ideal for live performance and other situations where noise reduction and feedback suppression are needed.
How far should my mic be from my cardioid?
The Distance Factor for a cardioid is 1.7. This means the cardioid may be placed 1.7 times the distance of the omni and produce the same audio quality. In this example, the cardioid may be located 3.4 feet away (2 feet x 1.7) from the talker and produce an acceptable recording.
What is a condenser microphone best used for?
Condenser microphones are best used to capture vocals and high frequencies. They are also the preferred type of microphone for most studio applications. Also known as capacitor microphones, condenser mics are mainly used in studios because of their detail and accuracy.
Why do I have to be so close to my mic?
Your mic should be as close to your mouth as possible in order to only pick up the sound of you voice, and not the other sounds of the room. As you get closer to the mic, an increase in low frequency response can occur, causing your voice to be overly bassy.
What is a cardioid condenser mic?
Cardioid mics primarily are sensitive to sound on one side or end of the microphone—that is, they are unidirectional—and reject sound from the sides and rear of the mic. Other polar patterns found in condenser microphones are: Hypercardioid.
How do I setup my cardioid microphone?
How to Use a Condenser Microphone
- Ensure that your microphone software has been properly installed on your computer.
- Set your microphone close to your computer.
- Set the microphone’s pattern switch to Cardioid.
- Connect the headphones to the microphone by plugging the cable into the output marked Phones.
