How much crushed stone do I need calculator?
Formula for Needed Crushed Stone Multiply the length (L), in feet, by the width (W), in feet, by the height (H), in feet, and divide by 27. This will tell you how many cubic yards of crushed stone you need. When using this equation, make sure all of your measurements are in feet.
What is the volume of 1 ton of crushed stone?
A ton of gravel with average-sized pebbles is about 0.705 cubic yards, or 19 cubic feet, assuming it has been screened for debris and contains no leftover dirt, sand, etc.
How many cubic meters are in a ton of crushed rock?
When viewing a product online, such as a decorative pebble, soil, or sand you will notice a few numbers that may look similar to this – 1.5 Tonne = 1 Cubic Metre. This is the bulk density conversion.
How many stone are in a cubic meter?
One cubic meter of concrete converted to stone equals to 378.96 st. How many stones of concrete are in 1 cubic meter? The answer is: The change of 1 m3 ( cubic meter ) unit of concrete measure equals = to 378.96 st ( stone ) as the equivalent measure for the same concrete type.
How do I calculate how much gravel I need?
Measure the length and width of the area in feet and multiply the figures together. Multiply your area figure by the depth of gravel that you wish to use, ensuring your measurement is also in feet. If your depth is in inches, divide it by 12 first. You now have a cubic feet volume figure.
How many cubic meters are in a ton?
1.133 cubic metres
1 ton (40 cubic feet) = 1.133 cubic metres.
How many tons is 804 cubic meters?
It says for compacted 804 there are 2.3 tonnes in a cubic metre (m3) so therefore you would need approx 21 tonne,give or take.
What is the difference between metric ton and cubic meter?
Tons and cubic meters do not denote the same physical property – metric tons measure mass, while cubic meters measure volume. However, you can determine the amount of space a ton of a specific material fills by using the mass per volume of the substance, known as the density. There are 1,000 kg in a metric ton.
What is 5 cubic meters in tonnes?
Cubic Meter to Ton Register Conversion Table
| Cubic Meter [m^3] | Ton Register [ton Reg] |
|---|---|
| 5 m^3 | 1.7657333361 ton reg |
| 10 m^3 | 3.5314666721 ton reg |
| 20 m^3 | 7.0629333443 ton reg |
| 50 m^3 | 17.6573333607 ton reg |
How do you convert metric tons to cubic meters for aggregate?
Convert tonne to m3 aggregate:- generally 1 tonne of aggregate equates as 1000kg and 1 m3 of aggregate weighs around 1500 kg, so covert tonne to m3 aggregate such as 1000/ 1500 = 0.66 tonnes, hence you can use aggregate tonne to m3 calculator as 1 tonne aggregate = 0.66 m3.
What is 57 gravel?
#57 Gravel, also known as Drainage Gravel, is gray and roughly textured, and typically sized at 1/2 – 3/4″ small.
How many tons in a yard of rock?
Convert cubic yards to tons of rock. For most gravel and small rock, there are about 1 and 3/8 tons (2750 pounds) per cubic yard.
How to figure the amount of pea gravel needed?
How to Figure the Amount of Pea Gravel Needed. If the area to be covered is a square or rectangle, you easily can calculate the amount of pea gravel needed by hand. Measure the length, width and depth in feet of the area to be covered. Multiply the three numbers together. Divide by 27 to get the number of cubic yards of pea gravel needed.
How much decomposed granite do you need?
Decomposed granite is often sold by the cubic yard, so divide the size measurement by 27, the number of cubic yards in a cubic foot, to determine how much granite you need. For example, a hole 20 ft long, 10 ft wide, and 4 in deep is about 66 cubic feet . Divide 66 by 27 to convert it into about 2.47 cubic yards of stone.
