How much clearance is required around a gas meter?

(a) Gas meter locations must be 78 inches high and allow for a minimum clear and level working space of 3 feet in front of the meter; width depends on meter size and the number of meters.

What is the normal residential gas pressure?

The natural gas pressure of the gas line leading to the home ranges from approximately 1/4 psi to 60 psi, depending on the number of homes or businesses served by the line. This compares to pressures of up to 1,500 psi for large-volume pipelines used to move the gas from the well fields to the local utilities.

Do gas meters need ventilation?

The purpose of ventilation in a meter installation housing is to; Ensure that minor gas leakage does not cause the atmosphere within the housing to become unsafe. Allows any escape of gas to be smelled or otherwise detected by passers-by. Reduces condensation.

Can I put a fence around my gas meter?

Your gas meter should not be enclosed inside the fence. Keeping your meter clear is vital to ensure that it does not get damaged, your gas service is not interrupted, and to prevent a malfunction.

How close can a gas meter be to a window?

Even maintaining the clearances noted to the left, meters shall not be installed under windows or openings that may be used as an emergency fire exit. A minimum of 6 inches is required between the bottom of the meter and final grade.

What is the B button for on my gas meter?

This is your electricity reading. If your meter has an ‘A’ and ‘B’ button, press ‘A’ until you get to TOTAL ACT IMPORT. The number below this is your electricity reading. Your meter might have three buttons to the side of the display.

What should gas pressure be at meter?

The working pressure of most meters should be between 19 mbar and 23 mbar. The pressure of this meter is 20 mbar, so no further action needs to be taken.

What is considered high gas pressure?

Proper gas pressure out should be; LOW FIRE 6.7” w.c. to 7.3” w.c. and HIGH FIRE 9.7” w.c. to 10.3” w.c.. Natural Gas; The input pressure should be approximately 5.5” w.c. to a max of 10.5” w.c..

Where should my gas meter be located?

In most properties though, the gas meter will either be in the kitchen, in the hallway or outside in a cupboard or meter box.

Can I move the gas meter?

Can I move my gas or electric meter myself? No, moving gas meters is a difficult process, so it’s not something you can do yourself. It’s illegal for anyone but a qualified, licensed professional – such as a Gas Safe engineer – to change the meter’s position.

What do I need to set my gas meter?

Prior to setting the meter: Gas service, rack and/or meter bar must be installed. The interior gas piping (house line) must be connected to the meter bar Pressure reducing regulators must be installed on 2psi house lines.

What do you need to know about meter set process?

The interior gas piping (house line) must be connected to the meter bar Pressure reducing regulators must be installed on 2psi house lines. All interior gas lines must be valved and capped. The interior gas piping must pass a county/city inspection (1st and/or 2nd if applicable) and the

Where is the best place to place a natural gas meter?

Please check with your gas equipment installer for details. Meter should be located in the front or within 10 feet of the front corner of the home. If you have a septic system, it must be clearly marked prior to the installation of a new service line.

Where to place gas meter riser and manifold?

Customer piping that extends along exterior wall to gas meter from upper part of building must be properly secured to building wall prior to installing gas meter(s) or meter manifold. d. When facing the meter, the gas service riser shall be to the left and the Customer owned piping must be to the right of the meter. e.