How long does Poli glow last?

With routine maintenance coats, Poli Glow can last up to 8 years and then it needs to be completely removed and reapplied. do i use poli prep again before i do my maintenance coats? No, Poli Prep is only necessary when preparing the surface prior to using Poli Glow or in the removal of Poli Glow.

Can you wax over Poli Glow?

Can I apply Poli Glow over wax? A. No. All wax needs to be removed from the surface prior to using Poli Glow.

What is Poli Glow made of?

Poli Glow has been RESTORING OLD FIBERGLASS for over 25 years! It is not a wax, so it won’t yellow or flake off. Instead, it is a polish made of water-based polymers with urethane fortification, to improve its longevity.

How do you use Poli Glow?

Apply Poli Glow by wiping in one direction, top to bottom or side to side. Do not wipe in circular motion. Do a 4′ X 6′ area at a time. Each coat dries in approximately 1-2 minutes depending on the temperature (minimum temperature for application is 55 F).

How do you remove Polyglow?

The ONLY way to remove it effectively is to wait it out for six months and let it break down for a while on its own, then start wet sanding.

How do you reapply a glowing Poli?

To reapply, clean boat with soap and water and apply Poli Glow. If stains are left on the surface and penetrate Poli Glow, use Clenz-All to remove stains. Then reapply Poli Glow. If scratches or wear spots occur, they can be touched up by applying a few coats of Poli Glow.

How do you reapply Poly glow?

Is there a quick shine solution for polyglow?

PolyGlow quick shine solution – beware ! There have been many discussion threads on the supposedly miracle quick-shine acrylic product “Polyglow”. I am posting this in the O’Day forum because there are many of us with the light grey hull of the late models ’86,’87,’88,’89. Colored hulls add to the problem of keeping them shiny and good looking.

What should I do with my polyglow gel coat?

You should just wash it with a gentle marine or auto soap and water. NO wax, no abrasives, etc. Soft brush. After it is toast (say 7-10 years, or so), it’s “time”. If it’s the original gel coat then: The gel coat doesn’t “owe you anything”.

What kind of Shammie is a poliglow applicator?

The Poliglow applicator is a shammie wrapped around a piece of wood with a small amount of foam..I’ll post a picture of it..wouldn’t be hard to make one..

Can you use polyglow on acrylic floor wax?

Polyglow is nothing more than acrylic floor wax . Any stripper that is designed to strip ACRYLIC floor wax will remove it completely. Then you can compound. Your other choice would be to use the Polyglow (or similar) prep cleaner to remove all stains and then reseal with Pollyglow or equivalent. .