How long does Interprotect take to dry?
Allow the InterProtect to cure for a minimum of 24 hours and then sand with 80-grit sandpaper.
How many coats of Interlux 2000E?
It usually takes 4-5 coats to apply the proper amount of InterProtect 2000E, but the amount of paint applied is more important than the number of coats.
How do I use Interprotect 2000E?
Bring the surface to a uniform, clean, bright metal surface with a surface profile of 2-3 mils (50-75 microns). Remove sanding residue and immediately apply a coat of Interprotect 2000E, thinned 15-20%. Apply 4-5 additional coats of Interprotect 2000E.
What is Interprotect 2000E?
Interprotect 2000E is a unique two part epoxy coating, developed to protect new and used fiberglass hulls from water absorption. Interprotect 2000E can also be used as an undercoat/filling primer to repair cracks in fiberglass decks. * Excellent adhesion to fiberglass, composite, metal and wood.
How long does it take for bottom paint to dry?
Allow 3 to 6 hours between coats and a minimum overnight dry before launching. See the specific Technical Data Sheet for bottom paint being used. Some bottom paint may require more than 2 coats.
How long does it take Interlux paint to dry?
In warm or windy conditions, up to 10% Interlux Brushing Liquid 333 may be added to ease application….How To Apply Interlux Brightside Marine Paint.
| Temp | Touch Dry | Minimum Sanding Time |
|---|---|---|
| 75°F | 2 Hours | 12 Hours |
| 95°F | 1 Hour | 8 Hours |
How do you use Interlux VC performance epoxy?
Method Apply 3 coats of VC Performance Epoxy. VC Performance Epoxy is designed for spray application but can be applied by brush and rollers. Mixing Mix base and curing agent thoroughly at the specified ratio. Allow 45 mins at 50 deg F/10 deg C and 30 mins above 77 deg F/25 deg C for induction.
How do you use Bilgekote?
Sand the primer with 180 – 220 grit wet or dry paper. Remove sanding residue by wiping clean with Brushing Liquid 333. Stir well and apply two to three coats. Apply in dry, well-ventilated conditions.
How long does it take Interlux Brightside to fully cure?
Cure Time: 8 to 16 Hours to Overcoat.
