How do you set up a Wii Sensor Bar?

Insert the Sensor Bar plug into the Sensor Bar connector on the back of the Wii console. Remove the protective film from the foam pads on the bottom of the Sensor Bar. For additional stability, add adhesive-backed foam tape from the sheet included with the Wii. Mount the Sensor Bar to the top of the TV.

How do you sync a wireless Wii Sensor Bar?

Open the battery panel of the Wii controller and press the small red button underneath, then put the panel back on. Watch the screen: if the first three lights stop blinking while the fourth remains solid blue, then your Wii controller is synced with your console.

How do I get my Wii Sensor Bar to work?

Check the cord on the Sensor Bar for any frayed wires or kinks, and verify that the Sensor Bar is free of obstructions. Check the button functionality, and that the Sensor Bar is operating correctly, by accessing the Wii Main Menu. Use the “+” and “-” buttons to scroll side-to-side through the Wii Channel screens.

How do you reset the Wii Sensor Bar?

Select “Wii Settings.” Select the right-pointing arrow on the right side of the screen, then select “Sensor Bar.” Select “Sensitivity,” then select “OK.” Select “OK” again when a dialog box appears on the screen.

How do you know if your Wii sensor bar is broken?

Adjust the camera angle and position until you can see the lights in the LCD display. If the lights are visible, the sensor bar is working. If the lights are not visible, the sensor bar will need to be replaced.

How do you know if the Wii sensor bar is working?

Connect the Sensor Bar to the Wii and turn the power on. Point the camera at the Sensor Bar so that it is displayed in the LCD of the camera. Five infrared lights should appear on both sides of the Sensor Bar. If the lights are visible, the Sensor Bar is working.

How does the Wii candle trick work?

Here’s how to do it: Place two lit candles roughly as far apart as the sensor bar is wide. In your Wii’s settings, choose whether the candles are above or below the television just like you would for the sensor bar. Aim the WiiMote between the two candles and your pointer will respond on the screen like normal.

Is there a light on the Wii sensor?

To help the Wii Remote triangulate its position, there are a set of five infrared lights on the front of each side of the Sensor Bar. Point the camera at the Sensor Bar so that it is displayed in the LCD of the camera. The five infrared lights can be seen on both sides of the Sensor Bar.

How does the Nyko Wireless Sensor Bar work?

Simplify and enhance your Wii® set up with Nyko’s Wireless Sensor Bar for Wii. The Wireless Sensor Bar allows full Wii Remote functionality without the hassle or mess of any wired connection to the console. The infrared field created by the Wireless Sensor Bar allows for play up to 25 feet away, perfect for larger or wall-mounted TVs.

Can a wireless sensor bar be used on a Wii?

The infrared field created by the Wireless Sensor Bar allows for play up to 25 feet away, perfect for larger or wall-mounted TVs. Compatible with Nintendo’s official Sensor Bar stand, the Wireless Sensor Bar is easy to set up, requiring no software or hardware installation on the Wii.

Where is the Power Save button on the Nyko?

The button, which rests on the top side of the bar, turns the bar on with a tap and off with a four-second press. The switch, which sits tucked on the back side of the bar, controls the sensor bar’s Power Save mode.

How long does a wireless sensor bar last?

Featuring 30 hours of battery life off 4 AA batteries (included) and a unique power saver mode with audible alarm, the Wireless Sensor Bar is designed for ultimate convenience. The strikethrough price is the List Price. Savings represents a discount off the List Price.