How do you reset the oil life on a Ford Fusion?
Press the “Setup” button on the steering wheel to access “Vehicle Settings“. Repeatedly press the “Setup” button on the steering wheel to toggle the selection until “Oil Life” is displayed. Press the “Reset” button on the steering wheel to select “Oil Life“.
How do you reset the oil light on a 2013 Ford Focus?
Place the key in the ignition and cycle to the “on” position without starting the car. While doing this, depress both the brake and gas pedals at the same time. After 3 seconds the center information display will read “Oil Reset in Progress”. After 25 seconds the display will read “Oil Reset Complete”.
How do you reset the oil light on a 2012 Ford Fusion?
For 2010-2012 Ford Fusion
- Turn on the car. So you can do this with the engine on.
- Go to the OIL LIFE screen. Next, you’ll hit the setup key a couple of times which will get you to the oil life menu.
- Press and hold the RESET button.
- Turn the ignition off and then start the engine to verify the indicator has been reset.
How do you reset oil light on Ford?
Press and hold the trip/reset button until the display reads “OIL LIFE SET TO 100%.” Turn the ignition to the “OFF” position. Start the engine and verify that the oil change required message is no longer displayed.
How to reset the oil change light on Ford Fusion 2013?
Oil Change Light Reset Ford Fusion 2013 Procedure. Turn the ignition to the “RUN” position. Press both the brake and accelerator pedals at the same time. After 3 seconds, the “SERVICE: OIL RESET IN PROG.” message will be displayed. After 25 seconds, the “SERVICE: OIL RESET COMPLETE” message will be displayed. Release the brake and gas pedals.
When do I need to Reset my Ford Fusion?
The Oil Change Light Reset Ford Fusion 2013 will need to be performed after every oil change. If it is not reset the system will be unable to properly track when your next oil change is due. Below is the procedure for the Ford Fusion 2013 .
How to reset the Ford Escape oil change light?
1 Use the UP and DOWN arrow buttons to scroll to the Settings menu and press the RIGHT arrow to enter the submenu 2 Scroll to the Vehicle menu and press the RIGHT arrow 3 Scroll to the Oil Life Reset menu and press the OK button
How to reset oil in Ford Focus prog?
1 Turn the ignition to the “RUN” position. 2 Press both the brake and accelerator pedals at the same time. 3 After 3 seconds, the “SERVICE: OIL RESET IN PROG.” message will be displayed. 4 After 25 seconds, the “SERVICE: OIL RESET COMPLETE” message will be displayed. 5 Release the brake and gas pedals. 6 Turn the ignition off.
