How do you remove a large nut from a kitchen faucet?
Using a basin wrench, reach up behind the sink basin from inside the vanity cabinet and grip the mounting nut that holds one of the faucet valve tailpieces to the sink or countertop. Turn the nut counterclockwise (viewed as you look upward at the nut from below) to loosen it, and unscrew it down the threaded tailpiece.
What wrench is used to reach large retaining nuts that hold faucets in place on sinks?
A basin wrench has a pivoting gripping head that sits at the end of a long handle, and it is designed to reach up into that awkward, inaccessible space behind a sink to tighten or loosen the mounting nuts on a faucet or the flexible supply tube nuts that connect to the end of the faucet tailpieces.
How do you tighten a mounting nut on a kitchen faucet?
While its jaws clamp onto the nut, you get to use the basin wrench’s long handle to reach the nut with ease. Then turn the handle clockwise to tighten the nut. The basin wrench’s jaws tighten automatically with every turn. Repeat rotating the handle until the faucet is stationary, and the kitchen nut is tight.
What size is a faucet nut?
The nut is about 1 3/8 – 1.5 inches diameter, and due to it’s size, a basin wrench won’t go around it. Due to it’s age, it’s corroded. It’s in behind the center of a double sink, and hard to get a good grip with enough force with anything large enough to go around the nut.
What size is kitchen faucet nut?
How do you get a locking nut off a faucet?
Share All sharing options for: Loosening a Stuck Nut
- Tighten the nut. Moving the nut in any direction is progress.
- Tap with a hammer. Jarring the nut can break its bond to the bolt.
- Apply heat. Metal expands slightly when hot, which may be enough to crack the nut free.
- Soak the nut.
What size is the nut on a sink faucet?
What to use to remove nut from kitchen faucet?
The straightforward approach, if you haven’t tried it already is to use an adjustable wrench adjusted to the correct size to remove kitchen faucet nut. You can also use a basin wrench if the space under your sink is too tight. Chances are that it won’t even budge. Next, try to tighten it with the same wrench. Yes, you read that right!
What happens when a nut on a faucet gets stuck?
Fixtures such as faucets or aerators get stuck when one or more of the nuts holding the fixture together gets stuck due to caked-on minerals. The problem wouldn’t bother you unless you are in the mood to replace the old faucet with a new one. You’ll have to remove the old faucet completely before you can attach the brand new one in its place.
Is there a way to tighten the NUT under the sink?
For a larger nut like this, it was designed to be either hand tightened, or with a wrench like the channel lock or adjustable wrench you linked to. But to use the wrench, you would need to first remove the sink from the counter. Some newer faucets have worked around this problem by using a hand tightened nut that has two screws on either side.
How big is the nut on my Kitchen Sink?
So there is only one rather large fixture attaching it to the underside of the sink, with a single metal washer and nut. The nut is about 1 3/8 – 1.5 inches diameter, and due to it’s size, a basin wrench won’t go around it. Due to it’s age, it’s corroded.
