How do you program a universal remote to a Hitachi TV?

How to Program a Hitachi TV Remote

  1. Turn on the component to be programmed, such as the television, stereo or DVD player.
  2. Press the “Code Set” button on your Hitachi remote.
  3. Press the button for the component you wish to program with the Hitachi Remote.
  4. Enter the manufacturer’s code for the component being programmed.

What are the codes for Hitachi TV?

Hitachi 4 digit TV remote codes:

  • 1004. 1009. 1010. 1013. 1053. 1057. 1058. 1065. 1078. 1083. 1113. 1114. 1115. 1128. 1173.
  • 1004. 1011. 1012. 1051. 1052. 1084. 1086. 1087. 1102. 1225. 1384.
  • 1030. 1132. 1133. 1134. 1191. 1208. 1209. 1210. 1211. 1212. 1226.

How can I program my Comcast remote to my TV?

If it has a Setup button:

  1. Turn on your TV.
  2. Press and hold Setup until the light at the top of the remote changes from red to green.
  3. Enter 9-9-1. The light should flash green twice.
  4. Keep pressing CH ^ until the TV turns off.
  5. Once the TV turns off, press Setup to lock in the code.
  6. Press the TV power button on the remote.

How do I program my universal remote to my TV?

Here is an example of likely steps:

  1. Turn on your TV or another device you wish to control.
  2. Press and release the DEVICE button on your remote that is associated with the product you want to control (TV, etc.).
  3. Press the Device Button again, as well as the POWER button at the same time.
  4. Release both buttons.

What are the universal remote codes for Hitachi TVs?

Hitachi Receiver Tuner Codes5159 Hitachi remote codes for TV list Jump to the MOST COMMON UNIVERSAL REMOTE CODES FOR TV here:The most common 2, 3, 4, and 5 digit universal TV remote codes can be found on the following pages: 2 digit TV remote codes, 3 digit TV remote codes, 4 digit TV remote codes, and 5 digit TV remote codes.

What is the code for the universal remote?

Universal Remote Codes by TV Brand ABEX Code: 185 ACME Codes: 003/ 021 ADA Code: 013

Where can I find the NAD HTR remote manual?

You can find the NAD HTR remote manual here. The T’nB Universal Remote manual can be located here. Finally, you can track down the REMOTEC Universal Remote manuals here. DAEWOO Codes: 004/ 005/ 009/ 017/ 018/ 019/ 042/ 058/ 082/ 083/ 085/ 097/ 100/ 126/ 127/ 130/ 138

How to program the Konka TV universal remote?

“Turn on” the remote, tap on the device button (TV, DVD, CBL and OK/SEL) for 3 seconds. The LED light indicates the device is ready to program. Point out the remote to device and click on “CH+” & “CH-“ switches. Remote will show on/off signals.