How do you make stiffener in Catia?

This task shows you how to create a stiffener by specifying creation directions. Open the Stiffener. CATPart document. Select the profile to be extruded, that is Sketch….

  1. Click Stiffener .
  2. Uncheck the Neutral Fiber option.
  3. Check the Neutral Fiber option again.
  4. Enter 12 as the thickness value.
  5. Click OK .

How do you make rib in Catia?

CATPart document.

  1. Click Rib . The Rib Definition dialog box is displayed.
  2. Select the profile you wish to sweep, i.e. Sketch . 2 .
  3. Select the center curve, i.e. Sketch. 1 .
  4. To go on with our scenario, maintain Keep angle.
  5. Click OK .

How do you combine solid in Catia v5?

Click Solid Combine . The Combine Definition dialog box appears. Select Sketch….The components you can select are:

  1. Sketches.
  2. Surfaces.
  3. Sketches sub-elements: for this, use the Go to Profile definition contextual command. (for more information, refer to Using the Sub-elements of a Sketch)
  4. 3D planar curves.

How do you use multi section solid in Catia?

Open the Multi-sections. CATPart document. Click Multi-sections Solid . The Multi-sections Solid Definition dialog box appears.

How do you sweep in Catia v5?

With two guide curves

  1. Click Sweep .
  2. Click the Explicit profile icon and select With with two guide curves from the Subtype drop-down list.
  3. Select the Profile to be swept out (DemoProfile1).
  4. Select a first Guide curve (DemoGuide1).
  5. Select a second Guide curve (DemoGuide2).
  6. If needed, select a Spine .

What is rib command in Catia?

This task shows you how to create a rib, that is how to sweep a profile along a center curve to create material. To define a rib, you need a center curve, a planar profile and possibly a reference element or a pulling direction. To create ribs you can combine the different elements as follows: Open profile.

How do I merge surfaces in Catia?

CATPart document.

  1. Click Join .
  2. Select the surfaces or curves to be joined.
  3. You can edit the list of elements to be joined:
  4. Right-click the elements from the list and choose the Check Selection contextual command.
  5. Click Preview .
  6. Click Cancel to return to the Join Definition dialog box.

What is slot command in Catia?

The Slot Definition dialog box is displayed. To define a slot, you need a center curve, a planar profile, a reference element and optionally a pulling direction. Select the profile, i.e. Sketch. 2 . The profile has been designed in a plane normal to the plane used to define the center curve.

How to use the stiffener command in CATIA V5?

When You get the Topologicat operation Error: Select the arrow or the Button “Reverse direction” 6)Offset the plane as required .. Eg:- If you want to keep the plane in the middle;offset it by giving half value of the total body

How to create a stiffener in CATIA CAD CAM engineering?

Catia HelpLeave a comment435 Views This task shows you how to create a stiffener by specifying creation directions. Open the Stiffener.CATPartdocument. Select the profile to be extruded, that is Sketch.6 (located in the Part Body entity). This open profile has been created in a plane normal to the face on which the stiffener will lie.

Which is the thickness of a stiffener in Catia?

From top: the extrusion is performed normal to the profile’s plane and the thickness is added in the profile’s plane. From sideis the default option. The application previews a stiffener which thickness is equal to 10mm. The extrusion will be made in three directions, two of which are opposite directions. Arrows point in these directions.

How does a CATIA application trim the geometry?

The application trims geometry in two steps: first, it trims the different sketcher elements composing the selected profile, then extrudes the resulting geometry and trims it to the body. The following example shows an initial profile composed of two lines.