How do you load a Staples heavy duty stapler?
Loading Instructions: Heavy Duty Stapler
- Place stapler on a flat surface.
- Pull the stapler slide mechanism out of the back of the stapler so there is room to insert the staples.
- Insert the staples onto the stapler slide.
- Reinsert the slide mechanism back into the stapler slide.
How do you open a stapler?
Open the stapler. To open these, grip the base of the stapler, then pull the top of the stapler until it lifts open and the staple tray is revealed. Back load staplers usually have a button on the back, so to open these, push the button until the stapler tray pops out slightly.
What kind of staples does the staples One Touch stapler use?
Keep papers tightly fastened by stapling them with this black and gray stapler. This stapler holds 420 standard staples (1/4″ leg length) and has a visible staple reload window so you never run out unexpectedly.
How do you stack with a stapler?
A. Hold the base firmly in one hand and pull back the top of the stapler, including the staple tray, to open it for tacking. Other models include a silver tab on the bottom of the stapler, toward the back. Press down on it and the stapler will automatically pop open enabling to use it to tack up papers.
How do you open a tacking stapler?
Open the stapler. Hold the base of the stapler firmly in one hand, then pull back the top of the stapler where the staple tray is. Other stapler models include a silver tab on the bottom of the stapler, toward the back. Press it, and the stapler will automatically pop open, enabling you to use it for tacking purposes.
How do you load a staple gun?
Rear-Loading a Manual Staple Gun Locate the pusher rod at the back of the gun. Push in on the rod and pull it out to remove it. Load the staples legs-down over the guide rails. Reinsert the pusher until it locks in place. Test the staple gun on a piece of paper or wood.
How is a stapler assembled?
How a Stapler is Made. Most parts of staplers these days are machine manufactured. The arm and base, depending on the size of the stapler, can be made of injection-molded plastic, a process in which liquid plastic is injected into a large collection of pre-shaped metal molds that, once the plastic is cooled, form the plastic into the needed shape.
How do you fix a stapler spring?
First pull out the spring assembly. Use a pair of needle-nosed pliers to pull the jammed staples out of the head of the stapler. In a worst-case scenario, it could help to drop the stapler on a solid surface a few times to loosen up the staples.
