How do you install master cooler pads?
- Step 1: Turn Off the Power. Shut off the evaporative cooler and unplug it.
- Step 2: Remove the Frame. Remove the frame or frames that hold the pads.
- Step 4: Remove the Old Pads. Pull the old pads out of the frame.
- Step 6: Prepare the New Pads.
- Step 7: Put New Pads in Frames.
- Step 8: Replace Rods or Clips.
How much does a Mastercool evaporative cooler cost?
The average Mastercool evaporative cooler cost professionally installed will typically range between $5,000 and $7,000*.
Which direction do MasterCool pads go?
Your cooling media is made up of alternating sheets having two different angles. The 15 degree angle slopes downward towards the inside of the cooler. The steeper 45 degree angle should slope downward towards the outside of the cooler (towards the air entering side).
Why is my MasterCool leaking?
Swamp coolers function by running water over pads that water is forced through in order to cool it off. Condensation and too much water in the system will lead to a drip. This overflow is normal! If it happens occasionally, it just means there’s a little more water in the air conditioner than normal and it’ll equalize.
Are MasterCool evaporative cooler?
As America’s evaporative cooling choice for years, MasterCool is second to none. Leading the industry in providing solutions to the age-old problems associated with conventional coolers, MasterCool is the smart choice. It’s coolers are constructed of the finest quality metal and parts available. …
How does a Mastercool work?
Water is pumped above the pad and drips down onto it. Air blows through the pad and the cooled air blows into the house. The strands in aspen pads are formed and shaped into rectangular or square pads about 1 inch thick. They are inserted into gridlike vertical holders that keep the pads from sagging.
How much does it cost to replace an evaporative cooler?
The cost to replace an evaporative air conditioner unit is from around $2,600 installed for the smallest model including new controller and up to around $4,000 for a standard installation. Price depends on brand, system size and ease of installation. In the industry this is referred to as an evaporative change over.
