How do you charge a Hoyer lift battery?
Hoyer Battery Charging Instructions
- Insert the power supply plug into the charge point at the base of the control box.
- Plug the charger mains lead/cord into a suitable mains/power outlet.
- Charging is fully automatic.
- To return the lift to service, pull the charger socket out and disengage from the mains supply.
How long does it take for a Hoyer lift battery to charge?
Insert the AC charging cable into the control box and pug into a working electrical outlet. Batteries require 7-9 hours to be fully charged. A complete initial charge should take approximately 12 hours.
What is the red button on the Hoyer lift?
The red emergency stop button, located on the rear of the control box, is in the OFF (out) position. Push the up and down buttons on the hand control and confirm the boom rises and lowers. Fit the power pack to the lift and make sure the latch holding the pack in place is fully engaged.
Why is my Hoyer lift beeping?
Those beeps indicate that the safe load limit has been exceeded and you should lower the patient immediately for their safety.
How long does a hoist battery take to charge?
The CHJ2 charger is a Switch Mode Power Supply (SMPS) version which makes charging of the batteries more efficient. The charging time for a BAJ1 or a BAJL (Standard) battery pack is approx. 4 hours.
How do you reset a Hoyer lift?
The red Emergency Stop Button is located on the front of the control box and is activated by pressing in. This will cut all power to the lift and only be reset by twisting the button counter clockwise and releasing. All Hoyer lifts are fitted with raise and lower buttons on the control box.
Is it illegal to use a Hoyer lift with one person?
As such, one of the first questions asked by someone who is considering the purchase of a Hoyer lift is whether or not it can be used by one person. While every situation is unique, in most cases the answer is yes.
How do you turn on a Hoyer lift?
All lifts share the same nomenclature names as pictured (left). base of the Hoyer Lifter must be spread to its widest possible position to maximize stability. hydraulic pressure release knob by turning it counter- clockwise, not more than one full turn. The release knob is located on pump near pump handle.
Are Hoyer lifts safe?
Hoyer lifts are mechanical devices that lift and move nursing home residents. However, improper use often results in significant injuries. While such devices are designed to aid the safety and mobility of elderly persons, negligent use of these types of devices can result in catastrophic injuries.
