How do I use Accu-Chek softclix device?

How to use the Accu-Chek Softclix lancing device

  1. Pull off the cap.
  2. Press the cap on again until it clicks.
  3. Rotate the cap until the desired penetration depth is set.
  4. Press the priming button down until it clicks.
  5. Press the lancing device firmly against the side of the fingertip.
  6. Press the yellow release button.

Is Accu-Chek softclix discontinued?

DISCONTINUED Accu-Chek® Multiclix Lancet Device – DISCONTINUED. Manufacturer: ROCHE DIAGNOSTICS CORP.

How do you put a lancet in Accu-Chek softclix?

First, you will need an Accu-Chek Softclix lancet. Remove the cap from the lancing device. Now insert the lancet into the lancet holder at the bottom of the device – push it all the way in until it clicks in place. Twist and remove the protective cap from the lancet to expose the needle.

What is softclix Lancet?

Accu-Chek Softclix lancets is a small and easy-to-operate device that minimizes any pain, making the lancing process easy and virtually pain-free. The penetration depth can be selected to match any type of skin. Uses: It helps attain blood samples.

Do Accu-Chek Softclix lancets expire?

We guarantee 4 years of sterility from the date of sterilisation, so you have plenty of time to use up your lancets.

How do you insert lancets?

Use your lancing device by following 3 steps.

  1. Take the cap off the lancing device.
  2. Insert a new lancet into the lancet device, as seen in the picture.
  3. Twist off the blue safety cap on the tip of the lancet after you insert the needle into the device.
  4. Replace the cap on the lancet.
  5. Twist the cap to set the lancet depth.

How to set up an Accu-Chek blood sugar test?

The steps are similar for many meters, and generally look like this: Wash and dry your hands—using warm water may help the blood flow. 3 Turn on the meter and prepare a test strip as outlined in your owner’s booklet. Many Accu-Chek meters turn on automatically when a strip is inserted. Choose your spot—don’t check from the same finger all the time.

How to get blood flow on Accu Chek meter?

Wash and dry your hands—using warm water may help the blood flow. 3 Turn on the meter and prepare a test strip as outlined in your owner’s booklet. Many Accu-Chek meters turn on automatically when a strip is inserted. Choose your spot—don’t check from the same finger all the time. Using the side of the fingertip may be less painful than the pads.

What kind of blood sugar monitor do you use?

Others use continuous glucose monitors (CGMs) that are either implanted in their bodies or attached to them. There are also hybrid monitors called “flash glucose meters” (FGMs) that can monitor blood glucose continuously and offer instant readings.