How do I setup port forwarding on Cisco 1841 router?

How to: Port forwarding on a Cisco 1841

  1. Step 1: Telnet in to router. Mikes-MacBook-Pro:~ mike$ telnet 192.168.
  2. Step 2: Set enable mode. C1841ROUTER>en Password: (enter enable mode password)
  3. Step 3: Enter config mode.
  4. Step 4: Now add port forward rule.
  5. Step 5: Test it.
  6. Step 6: Save it.

How do I reset my Cisco 1841 router?

How do I default or reset a Cisco router?

  1. Connect the console cable to Router 1841.
  2. Use the power switch in order to turn off the router, and then turn the router back on.
  3. Press Break on the terminal keyboard within 60 seconds of power up in order to put the router into ROMMON.

What is Cisco Configuration Professional?

Cisco Configuration Professional (Cisco CP) is a GUI based device management tool for Cisco access routers. This tool simplifies routing, firewall, IPS, VPN, unified communications, WAN and LAN configuration through GUI based easy-to-use wizards.

How do I set up a new Cisco router?

Enter in global configuration mode to execute following commands.

  1. Change default router name.
  2. Secure console port.
  3. Secure auxiliary port.
  4. Enable telnet access on cisco router.
  5. Login banner.
  6. Assign hostname to IP Address.
  7. Disable automatic domain lookup.
  8. Enable logging synchronous.

How do I restore my Cisco 1841 router from Rommon mode?

Please see the regular process to reset the password on 1841 Router below,

  1. Connect the console cable to Router 1841.
  2. Use the power switch in order to turn off the router, and then turn the router back on.
  3. Press Break on the terminal keyboard within 60 seconds of power up in order to put the router into ROMMON.

How do I clear my Cisco router configuration?

Clear the configuration of your switch

  1. Log on to your switch, and enter the privileged EXEC mode by entering enable and then entering the enable password command.
  2. Enter clear config all to reset the entire system. You don’t need to reload the switch because processing the command wipes the switch.