How do I reset my Denon AVR 1713?

Resetting factory settings

  1. Turn off the power using .
  2. Press. while simultaneously pressing TUNER PRESET CH + and TUNER PRESET CH -.
  3. Remove your fingers from the two buttons when “Initialized” appears on the display.

How do you initialize a microprocessor?

Turn off the power to the Denon receiver using the power button. Make sure that the receiver is completely turned off and not in standby mode. Any speakers or devices connected to the receiver can remain in place. Simultaneously press the power button and two other buttons in combination to initiate the reset process.

How do I reset my Bluetooth on my Denon receiver?

Press and hold the “SOUND MODE >” button, the “TUNER PRESET CH+” button and the “POWER” button simultaneously on the AVR for a few seconds until the display starts flashing at interval of about 1 second.

How do I manually calibrate my AV Receiver?

Manually: Calibrate Surround Sound Levels with an SPL Meter

  1. Set your receiver to 0dB volume.
  2. Go into the System Setup menu of your AV receiver.
  3. Navigate to the speaker setup submenu.
  4. Select channel level or speaker level (in some receivers you need to enable the test tone)
  5. Select the Left speaker.

How do I get my Denon receiver to turn on my TV?

To turn on HDMI control in the receiver, press the SETUP button on the remote, select VIDEO, then HDMI Setup. In that menu, you will be able to turn on HDMI Control. Once HDMI Control is turned on, the receiver will accept the ARC audio from the TV.

What is Denon Smart menu?

This function can be used to configure the settings of this unit, select an input source and set Tuner and Internet Radio stations using the TV remote control. Enable the HDMI control function of this unit and the TV. link.

How do you initialize a Denon microprocessor?

What does resetting the microprocessor do?

When you do initialize the microprocessor, remember that this erases any setup instructions you may have previously programmed into the unit. However, the on-screen menu will quickly get you through a new setup.

How do you put a Denon receiver in pairing mode?

Activate the Bluetooth settings on your mobile device. Press and hold Bluetooth on the remote control unit for at least 3 seconds. This unit will go into the pairing mode. Select this unit when its name appears in the list of devices displayed on the screen of the Bluetooth device.