How do I reset my amsec safe code?
How to Reset an Amsec Push Button Safe Combination
- Punch in the current password and open the door. Lock the door while it’s still in the open position.
- Press the “Change” button one time.
- Punch in a series of five numbers to set the new password.
- Test the new code to ensure it works.
How do I open an amsec safe?
How to Unlock an American Security Safe
- Set the dial on the safe to “0.” Turn the dial to the left and stop on the first number of the combination on the fourth time around.
- Turn the dial to the right.
- Turn the dial to the left.
- Turn the dial to the right until the bolt retracts and open the safe.
Why is my amsec safe beeping?
After four incorrect code entries, your lock will enter into Penalty Lockout mode. The Penalty Lockout will last for 15 minutes, during which time your keypad will not accept any input. If you press any key during the lockout period, the keypad will rapidly flash and chirp eight times.
Why isn’t my safe opening?
There are a handful of reasons your safe won’t open. As outlined above, it could be due to dead batteries, lockout mode or time delay, jammed bolt work, disconnected or damaged wiring, and deactivated code. If the safe isn’t still opening, you can call a locksmith for assistance.
How do I open my micro fridge electronic?
To open the lock simply press the “C” key to clear and wake up the electronics. Now press the keys of the combination one at at time and finish with the “#” key. If the com- bination keyed is correct, the lock will cycle open for three (3) seconds.
How do I change the combination on my amsec esl10?
Note: Combination changes should always be done with the door locked OPEN. The input of a new combination is done by keying a “Change Key” code, followed by the Old Combination to validate a change and then followed by entering the New Combination twice to avoid a keying error.
How do I change the combo on amsec ESL 20?
Press the “#” key. If the combination was entered correctly, the lock will cycle open for three seconds. During this 3-second period, turn the handle of the safe to the unlocked position and pull the door open. You may change your combination any time you’d like and as many times as you’d like.
