How do I remove the ribbon from my ZM400 printer?
- Operations. Load Ribbon. 3/27/07.
- Remove Used Ribbon.
- To remove used ribbon, complete these steps:
- To loosen the ribbon, squeeze it against the ribbon take-up spindle tension blades (
- ). At.
- ). The tension blades collapse into the ribbon take-up spindle, loosening the ribbon.
What does media out mean on a Zebra printer?
Possible Cause: The media is not loaded or is loaded incorrectly. Solution: Load media correctly. Possible Cause: Misaligned media sensor.
How do you calibrate a zebra zt610?
To Calibrate
- Remove a label so only the liner is underneath the media sensor.
- Move the ribbon away from the ribbon se.
- Press ‘Pause’
- “Reload all continue” warning will appear.
- Pull labels forward until facesheet is under the print head.
- Smooth the ribbon back into place.
- Press ‘Pause’ and the printer will calibrate.
How do you reset a zebra?
Restore with hard reset or Recovery mode Zebra TC51 2- Keep holding on volume down and power keys together for a few seconds in your Zebra TC51. In some devices according to the Android version the combination can be the power key and the volume key up. 3- When the Zebra logo is displayed, release the buttons.
Why is there a warning ribbon on my zebra zm400 printer?
If your ZM400 has ribbon installed and your menu setting is set to Direct Thermal then you will receive the Warning Ribbon In error on your LCD screen. Make the changes in the menu to ensure the printer is in Thermal Transfer mode and this will most likely solve your problem!
Where is the ink on a Zebra printer?
On Zebra printers the ink is on the outside of the ribbon roll (see note) and this is the surface that should be facing the labels so ink transfer is accomplished. Read More>> Note: There is a reverse wound Ribbon Supply Spindle Optional P/N 79830M for the ZM400 that can support the inside inked ribbon
Can a Zebra printer be used without ribbon?
If you are interested to upgrade your products, Contact Zebra. The printer can be used for a wide variety of printing applications. Printing can be done with and without ribbon and for each method the printer (and driver/software) must be properly configured.
Why is the ribbon not loaded in Thermal Transfer Mode?
Phenomenon 3: In thermal transfer mode, the ribbon is not detected by the printer even though the ribbon is loaded correctly. Possible reason: The printer is calibrated without a ribbon loaded, then the ribbon is inserted without performing a user recalibration of the printer, or the printer defaults are not loaded.
