How do I prepare for my pool closing?
Ten Steps to Closing your Pool the Right Way
- Balance water chemistry: The week you’re closing your pool, make sure your water falls within the ranges below.
- Add shock and algaecide:
- Clean pool:
- Store equipment:
- Lower water level:
- Drain pump, filter, chlorination and heating equipment:
- Lubricate:
- Winterize plumbing:
Can I use shock to close pool?
Even if your water is clear, introduce a superchlorinating powder, known as pool shock. The product should contain at least 65 percent sodium hypochlorite. Typically, a 1-pound bag is enough for 10,000 gallons of water. Mix the product with some pool water in a large bucket.
Should I shock pool before closing?
Shocking kills any bacteria that might linger in your pool during the winter. We recommend shocking a few days before you close the pool. If that is not possible, make sure to shock the pool the night before you close it for winter.
What chemicals do I need to close a pool?
What chemicals do I need to close my pool?
- Chlorine.
- Pool Shock.
- Soda Ash.
- Baking Soda.
- Muriatic Acid.
- Winter Algaecide.
- Pool Antifreeze.
- Stain and Scale Prevention.
How much shock Do you need to close a pool?
Shocking your pool is easy: Use a shock treatment to bring your 10 to 12 PPM. Then, wait a day or two for the chlorine to come down to its normal level, about 1.5 to 3.5 PPM. Pro tip: For best results, shock your pool a few days before you plan to shut it down.
What chemicals are needed to close a pool?
How far down do you drain your pool for winter?
Drain the water down to no more than 6 inches from the bottom of the skimmer if you plan to use a standard floating winter cover. Use your pool filter, switched to the “Drain” setting, to empty the pool water.
Should I put algaecide in my pool when closing?
By simply adding algaecide to your water prior to closing, you can prevent algae growth from occurring during the cold, winter months which makes for an easier opening in the spring. You can apply algaecide directly to the pool water and allow the pump to continue to circulate for approximately two to four hours.
Do I need to shock pool before closing?
Should you shock your pool before closing?
What to use to close inground swimming pool?
If your water has high levels of metals (if your water comes from a well, for example), add Metal sequestrant when closing. This suspends any metals in the water, so they can’t settle onto your pool surfaces, oxidize, and eventually cause stains.
When do you blow out the pool lines?
That’s why it’s important to blow your lines out after you’ve achieved the perfect chemical balance for pool closing, shocked your pool, and have finished any other part of the pool closing routine that requires your pump to be on. Because once you blow out your lines, your pump is done running for a long time.
What should I do before closing my pool for the winter?
Cleaning your pool before closing for the winter prevents algae and makes your spring opening even easier. Make sure to thoroughly brush the sides and floor, skim the surface and clean out the skimmer and pump baskets after vacuuming the pool. 3. Manage Your Water Level 4. Balance the Pool Chemistry
How can I get water out of my Pool?
Get That Water Out Use your ShopVac to remove water being blown out of the skimmer until it’s dry. Most pools have one or two skimmers. If you have two, you can blow air from one skimmer to the other skimmer by closing a valve off at the pump.
